Return to Fermtech Plastic Bottle Wand - 3/8"
Sort By::
Page of 1


  0 of 0 people found the following review helpful:
 
5 of 5 Plastic Bottle Wand Filler June 2, 2016
Reviewer: Al from ON Canada  
I have used this same piece of equipment absolutely countless times for years, WITHOUT fail. It's simple if you are precise and  attentive.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
4 of 5 Works for me... September 29, 2014
Reviewer: Anonymous Person from Summerland, BC Canada  
I have no problem with leaks. Attached it to my siphon tubing but found it  difficult to get the (siphon) tube filled. Once I did worked well, fast quick and simple!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
2 of 5 Save Your Money September 30, 2013
Reviewer: Ryan from Nepean, ON  
Used mine for the first time yesterday. The clear plastic tube was not glued on to the shutoff valve properly. It leaked profusely but got the job done with significant mess. I will definitely be making a bottling bucket for my next batch. I'm glad it wasn't a lot of money.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Required for Bottling September 29, 2013
Reviewer: Eric from Waterloo, ON Canada  
Works very well for bottling.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
2 of 5 wishing it was spring loaded August 31, 2013
Reviewer: Matt Bryenton from Charlottetown, PE Canada  
I love the idea of this for bottling but with it being gravity triggered I find that it is too sporadic with it's operation.  Sometimes it just keeps letting the beer pour out even after removing it from the bottle. I think if it was spring loaded it would be much better.  After the second time I poured beer all over the kitchen floor with it, it went in the garbage.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 A must for bottling August 23, 2013
Reviewer: justin from Ottawa, ON Canada  
Bottle fillers are a must if you're not kegging and want to bottle condition your beer. I attach my bottle filler to a spigot on my bottling bucket. To attach them, I use an inch of vinyl tubing. It works like a charm. If you go this route, I highly recommend attaching a dip tube on the inside of the bucket as well. You'll get almost every last drop.

Was this review helpful to you?