> Brewing Equipment > RoboBrew and Accessories >

RoboBrew V3.1 All Grain Brewing System - 35L
RoboBrew V3.1 All Grain Brewing System - 35L
Alternative Views:

Newest version on the market

  • *New and Updated Circuit Board for 2019*
  • New "Easy Dump" Handle
  • New Vented Bottom
  • New "Easy Grip" Feet

Please Note:
This model doesn't need the silicon seal at the top of the mash pipe.

The wait is over! Fully certified for use in Canada, the RoboBrew V3.1 All Grain Brewing System is here at OBK, plus we are the only store in Canada that stocks service parts. It is designed to be a turnkey system that is an excellent jumping on point for all grain brewing. The all-in-one design is very simple and intuitive and makes setup, brewing, and cleaning EASY!

Built into the RoboBrew are heating elements (for heating and boiling), a pump (for recirculation), a water-resistant control panel (for settings and monitoring), a removable grain basket, and a built-in spigot (for transferring).

It uses 110v power allowing it to be used almost anywhere.

Built to make batches up to 30L, with a total capacity of 35L (9.24 gal).

Looking for an easy way to run water through the immersion chiller?

Simply add the RoboBrew 1/2" Tubing Kit to your cart.

This kit allows you to hook your RoboBrew directly up to a garden hose.
Price: $499.99
Sale Price: $449.99
Save $50.00!

Price with Selected Options: $449.99

Availability: Usually Ships in 24 Hours

Add a Neoprene Jacket?*:

Add a Ratchet Pulley Rope?*:

1 Year Extended Warranty?


RoboBrew Brewzilla V3.1 All Grain Brewing System - 35L

  • Stainless Steel Immersion Chiller
  • Digital Backlit Temperature Controller
  • 110v Plug and Power
  • Stainless Steel 1/2" BSP Ball Valve with 1/2" OD barb
  • Magnetic drive pump in the base of the unit
  • Dual Heating Elements (1000w and 500w)
  • Glass Lid
  • Stainless Steel recirculation arm
  • This model doesn't need the silicon seal at the top of the mash pipe
  • *New and Updated Circuit Board for 2019*
  • New "Easy Dump" Handle
  • New Vented Bottom
  • New "Easy Grip" Feet
  • This product uses BSP fittings our NPT fittings and camlocks are not compatible
  • 35L (9.24 gal) Capacity
  • Delay Start Timer
  • Step Mash Functionality
  • Stainless Steel Body
  • Interior Volume Markings
  • Displays temperature in both °C and °F

Everyone should first read the manual before brewing with the RoboBrew for the first time. If you don't have it anymore, you can download it here.

Warranty Information:

At OBK we provide a 1-year warranty for all RoboBrew parts (excluding heating elements). We carry all warranty parts in house so we will be able to fulfil your replacement needs in a timely manner. Important note, the boilers are thin metal and may have cosmetic surface defects like scratches and dents on the outside during shipping. This is normal.

The lid for these untis are designed to be airtight. It is normal to push them in with force and use the clamps to secure in place.

This unit needs to be cleaned before use or testing to remove manufacturing oils. Failure to clean it first will cause some staining that will need to be removed with
Bar Keepers Friend Cleanser.

Average Customer Review: Average Customer Review: 5 of 5 5 of 5 Total Reviews: 5 Write a review.

  2 of 2 people found the following review helpful:
5 of 5 Awesome system, no regrets March 19, 2019
Reviewer: Court from Toronto  
The Robobrew is a phenomenal unit that makes brewday so easy.  I have a propane based 10gal system as well, but the Robobrew makes 5gal batches an absolute pleasure.  

Not only is the unit great, but the service at OBK is unbelievably awesome.  Their service has made me a loyal customer for all my brewing equipment.

Was this review helpful to you?

  1 of 1 people found the following review helpful:
5 of 5 The BrewZilla is a great add to my home Brewery March 19, 2019
Reviewer: Arlen K from Amherstburg, ON Canada  
The BrewZilla has made my brew days quicker with less work.  I’m still getting used to it after three brews.  My Brew days have been a lot shorter and better efficiency than before with my kettle and a Cooler/ Mash tun.  I highly recommend it, with lots of reference and help on YouTube and online you’ll get the hang of it pretty quickly.

Was this review helpful to you?

  1 of 1 people found the following review helpful:
5 of 5 Awesome for up to 6 gallon brews March 19, 2019
Reviewer: Bruce Itterman from Mountain  
I received my Robobrew just about 4 to 5 weeks ago and done 4 brews already. I am really enjoying how much simpler and easier it is to brew. Getting the right temperature step mashing and even setting up for water to be ready to mash In when up in the morning or home from work. I could not be happier with this unit. Only problem is clogging the pump with hoppy beers when using pump to aid in whirlpooling. A hop spider would solve this for easily. Love that I do not have to babysit my brewing and can do other activities cleaning etc while brewing. I highly advise people get the robobrew jacket for a more viggerious boil.

Was this review helpful to you?

  5 of 5 people found the following review helpful:
5 of 5 Killer system!! January 29, 2019
Reviewer: Jeffery Byers from Baden  
This system is a game changer. Ive been doing the mash tun/propane burner system for a couple of years now. This is way way easier. I do still use the Mash King cooler but for sparge water storage. I use the Step Mash steps for preheating the water to 80c...about 30 plus litres. then pump out half or so in to the cooler. Works great!! Then adjust the temps to run at 66c and dough in. After that its pretty much routine for most all grainers. But having the kettle up to temp first thing in the morning saves a bunch of time. Hope this helps if you're thinking on upgrading. Oh and I haven't used the fine mesh screen either...haven't needed it as the grain bed works well as an extra filter. Cheers!!

Was this review helpful to you?

  2 of 2 people found the following review helpful:
4 of 5 Awesome machine thus far November 16, 2018
Reviewer: Adam from Alliston  
Only done one brew, but it was my first ever. Straight to all-grain, figures that’s the way to go.

Chocolate milk stout from OBK was first up. Robobrew maintained perfect temps, excellent boil and easy clean. The included chiller cooled wort to 72F in 25 minutes.

Cold tap water to mash-in (150F) was 30 minutes.

I did have an issue where my pump would
Not run. Start but not run. Looked online and no other mention of this issue. OBK mauled new controlboard and problem solved. Awesome service from OBK.

Many videos online show robobrew V3 which was very educational. Can’t wait to try this beer.

Four stars due to pump Issue. But OBK is definitely 5 stars.

Was this review helpful to you?