> Brewing Equipment >

Stainless Steel 304 Weldless Brew Kettle - 13 Gallon (50 L)
Stainless Steel 304 Weldless Brew Kettle - 13 Gallon (50L)
Alternative Views:

This weldless brew kettle has a capacity of 13 (US) gallons (50L, 52 Quart). It is made out of high quality 304 stainless steel and is 20 gauge.

The higher quality stainless steel coupled with the thicker gauge makes this kettle a great improvement over our general kettles.

It features easy to grip well positioned ergonomic handles that are bolted to the kettle providing far sturdier handles opposed to flash welded ones that are traditionally found on kettles of this tier.

Having the handles on the front and rear of the kettle localizes the protruding portions in two locations opposed to the traditional three. By having the front handle in line with the hardware you can move or re-position your kettle without having to worry about damaging the hardware.

This brew kettle features weldless connections, laser etched markings every gallon, a 2-piece stainless steel ball valve, in addition to a 2" probe thermometer (with the option to upgrade).

Please Note:
Prior to ordering please be aware that these kettles may have some scratches and minor imperfections.

We recommend you purchase this product by itself. Shipping items inside the pot increases chances of damage during shipping. We will of course ship items inside a pot if you want. But we can not assume liability for damage if you choose to do so.

Full Kettle Comparison Chart
Price: $139.99
Sale Price: $109.99
Save $30.00!

Price with Selected Options: $109.99

Availability: Usually Ships in 24 Hours

Ball Valve Options


Stainless Steel 304 Weldless Brew Kettle - 13 Gallon (50L)

  • 304 Series 20-Gauge Stainless Steel
  • Polished Stainless Steel
  • 13 Gallon Capacity
  • Graduated Volume Markers (From 1 to 11 Gallons)
  • Included lid
  • Weldless Fittings

  • 2" Probe Thermometer with 3" Face
  • Stainless Steel 2 Piece Ball Valve (Optional Upgrade)

Interior Kettle Dimensions:
  • 15 3/8" Height (39.05cm)
  • 15 5/8" Diameter (39.69cm)

Exterior Kettle Dimensions (Handles Included):
  • 16 5/8" Height (42.23cm)
  • 19 1/4" Diameter (48.9cm)

Please note that this product does NOT have a Tri-clad bottom

Full Kettle Comparison Chart

May we also suggest...
Stainless Steel Fitting - 1/2" Male NPT X 1/2" OD Barb Bar Keepers Friend Cleanser and Polish Powder (12 oz)
Price: $4.49

Price: $5.79

Stainless Steel 1/2" MPT (Male Pipe Thread) x 1/2" Barb Fitting Bar Keepers Friend Cleanser and Polish Powder (12 oz)

Average Customer Review: Average Customer Review: 3 of 5 3 of 5 Total Reviews: 1 Write a review.

  0 of 0 people found the following review helpful:
3 of 5 Subpar Quality Kettle February 14, 2021
Reviewer: Ewald from Calgary  
I know this is a relatively inexpensive kettle, but I decided to get it because it had riveted handles. This fact, and the slightly thicker base, are the only upsides. The welding and grinding of joints in this kettle is messy, and the top is not level, preventing the lid from sitting flush. This kettle also NEEDS to be passivated, as rust will form. It might also be prudent replacing the screw holding the knob to the lid with a stainless steel screw. I have one of the inexpensive, welded 16 gallon kettles from OBK and much prefer the quality of that one.

Was this review helpful to you?