> Brewing Equipment >

Stainless Steel Tri-Clad (Induction Ready) Welded Brew Kettle - 18 Gallon
Mash King 18 Gallon Stainless Steel Welded Brew Kettle
 
Alternative Views:


Made of 200 Series 18 Gauge Stainless Steel and it's total volume is 18 (US) gallons (69L, 73 Quart). It features solid easy to grasp handles on the sides that allow you to move it with ease. As well as two pre-welded 1/2" NPT Couplers, which are great for easily installing thermometers and ball valves. This brew kettle features a welded kettle kit, a OBK thermometer, a sturdy lid and a beautiful finish.

We recommend you purchase this product by itself. Shipping items inside the pot increases chances of damage during shipping. We will of course ship items inside a pot if you want. But we can not assume liability for damage if you choose to do so.

FREE Every Drop Dip Tube accessory, a $15 value added free to every welded kettle! The Every Drop Dip Tube is designed to thread onto the interior side of the ball valve coupler. When installed the angle can be easily adjusted to help pick up every last drop from your kettle. Make the most out of your kettle with this FREE accessory!


Full Kettle Comparison Chart
Price: $309.99

Price with Selected Options: $309.99

Availability: Usually Ships in 24 Hours

Thermometer Options


Ball Valve Options


Inside Port Options



Quantity:
Features
 

Tri-Clad Induction Ready 18 Gallon Stainless Steel Welded Brew Kettle

Specifications:
  • 200 Series 18 Gauge stainless steel brew kettle
  • 5mm Tri-clad Bottom. Induction Ready
  • Bolted on handles
  • Strong sturdy lid
  • Brushed Stainless Steel
  • 25% thicker walls over entry level and economy pots
  • 625% thicker bottom compared to entry level and economy pots. Prevents scorching
  • 304 Stainless Steel 1/2" two piece OBK ball valve
  • OBK thermometer with 3" face dial & 2" probe
  • FREE Every Drop Dip Tube accessory, a $15 value added free to every welded kettle!

Dimensions:

  • Inner Kettle Dimensions: Height 17.5" (44.5cm) x Diameter 17.5" (44.5cm)
  • Exterior Kettle Dimensions (handles included): Height 18.5" (47cm) x Diameter 21.5" (54.6cm)
  • 1 1/2" (3.8 cm) From Center of Bottom Port to Bottom of the Inside of the Kettle
  • 6 1/2" (16.5 cm) From Center of Thermometer Port to the Bottom of the Inside of the Kettle

May we also suggest...
Stainless Steel Fitting - 1/2" Male NPT X 1/2" OD Barb Bar Keepers Friend Cleanser and Polish Powder (12 oz)
Price: $3.49

Add
Price: $5.39

Add
Stainless Steel 1/2" MPT (Male Pipe Thread) x 1/2" Barb Fitting Bar Keepers Friend Cleanser and Polish Powder (12 oz)

Average Customer Review: 5 of 5 Total Reviews: 1 Write a review.

  0 of 0 people found the following review helpful:
 
Recommended November 30, 2018
Reviewer: Jay from Kirkland Lake  
I have used this kettle twice for double batches (10 gallons). This is a heavy duty kettle, and is impressively built like a tank. The temperature guage is nice and accurate, and the valve makes it real easy to fill 2 fermenters back to back. I use this on the kitchen stove straddling 2 burners, without issues. Stirring to whirlpool, then dump with the nice included dip tube. Super happy with this time saving upgrade, many thanks OBK!

Was this review helpful to you?