> Hardware > Fittings >

Stainless Steel Weldless HERMS Bulkhead - 1/2" Male NPT X 1/2" Compression
Stainless Steel HERMS Bulkhead - 1/2" Male NPT x 1/2" Compression
 
This is a custom made weldless compression bulkhead that can be used to install a 1/2" HERMS coil into any kettle or keggle. The forward locknut is permanently welded to the assembly for a solid point to screw the bulkhead into place and to minimize leakage.

This product uses a 1 1/8" nipple. The total length of the bulkhead is 2 1/4". The Maximum wall thickness is 5/8". This requires a 7/8" hole to install.

Measure before ordering.
Price: $19.99

Availability: Usually Ships in 24 Hours
Quantity:

Features
 

Stainless Steel HERMS Bulkhead - 1/2" Male NPT x 1/2" Compression

Specifications:
  • Made out of 304 stainless steel
  • Attaches to 1/2" NPT hardware
  • Compresses 1/2" OD tubing

Average Customer Review: Average Customer Review: 4.5 of 5 4.5 of 5 Total Reviews: 2 Write a review.

  0 of 0 people found the following review helpful:
 
4 of 5 Really well made part April 16, 2018
Reviewer: Jeff S from Amherst, NSA  
This is a fantastically made part. Much less chance of leaks with the one nut being welded to the assembly.

One big note is that this isn't a bore through fitting. Your ½" pipe will only slide in about ½" into the compression side of the fitting.

Was this review helpful to you?

  2 of 3 people found the following review helpful:
 
5 of 5 Great Bulkhead! March 20, 2016
Reviewer: Steve S from Ottawa  
I've made my own weldless bulkheads in the past, but decided to buy these.
I'm glad I did.
For the same cost of putting it together myself, I got this without having to source all the parts.

I also found the nuts with a recess for the o-ring to be a really nice touch. I could really tighten the fitting without worrying about crushing the o-ring.

Great product! Highly recommended!

Was this review helpful to you?