> Brewing Equipment >

Stainless Steel Weldless Thermowell - 1/2" Female NPT (5 3/4")
Stainless Steel Weldless Thermowell - 5 3/4" Long
This is a Stainless Steel Weldless Thermowell for installing on brew pots, kettles, fermenters, etc. Requires drilling a 7/8" hole for installation. Features two flat silicone sealing washers for both inside and outside of the application. The total length is 7 1/2" with a 5 3/4" Probe length, the outer diameter is 3/8" and the inner diameter is 5/16". Opposite the probe is a 1/2" Threaded Male connection with a 1/2" stainless steel backnut and 1/2" stainless steel coupler. With the inclusion of the coupler, you have the choice to add on either male or female connections for the thermowell. The stainless steel coupler can also be used as a wire shield for temperature controllers.

This item does work with Ranco or Johnson Digital Controls.
Price: $23.49

Availability: Usually Ships in 24 Hours


Stainless Steel Weldless Thermowell

  • Made out of 304 Stainless Steel
  • 3/8" OD Probe
  • 5/16" ID Probe Hole
  • 5 3/4" Probe Length
  • 1/2" Female NPT

May we also suggest...
Mash King Thermometer - 1/2" Male NPT (6" Stem) Stainless Steel Welded Brew Kettle - 19 Gallon Weldless Sight Gauge (16")
Sale Price: $16.99

Price: $169.99

Price: $44.99

Mash King Stainless Steel Thermometer 19 Gallon Stainless Steel Brew Kettle OntarioBeerKegs 16" Weldless Sight Gauge

Average Customer Review: 4 of 5 Total Reviews: 1 Write a review.

  0 of 0 people found the following review helpful:
Installed in Speidel 60L March 2, 2017
Reviewer: Andrew H from Cape Breton, NS Canada  
I installed this in through the side of a Speidel 60L fermenter.  Works great. Didn't need the 1/2" coupler but I'm sure it will get used elsewhere.  Have one in each of my 3 Speidel fermenters.

Was this review helpful to you?