> Brewing Equipment > Mashing > False Bottoms & Bazooka Screens >

Sanke Contoured 11" Stainless Steel False Bottom
Sanke Contoured 11" Stainless Steel False Bottom
 
Alternative Views:


11" Stainless Steel False Bottom Contoured for Sanke Kegs. Specifically made to fit the contours of a commercial Sanke keg, this false bottom is an easy choice for converting to a mash tun. Includes a flared dip tube to eliminate dislodging while stirring the mash.
Price: $32.99

Availability: Usually Ships in 24 Hours
Quantity:

Features
 

Sanke Contoured Stainless Steel False Bottom


This Sanke False Bottom features a 3/8" Dip tube with a flared end for holding the false bottom in place.

Dip tube measurements:
  • Long Length = 7"
  • Short End with Flare = 3.5"

(Measured from end to perpendicular opposite end)

May we also suggest...
Teflon Tape Stainless Steel 1/2" Male NPT x 3/8" Compression Stainless Steel 3 Piece Ball Valve - 1/2" Female NPT Stainless Steel 2 Piece Ball Valve - 1/2" Female NPT
Price: $1.79

Add
Price: $15.49

Add
Price: $14.99

Add
Price: $9.99

Add
Teflon Tape (aka Plumber's Tape) is used to wrap around your threaded brass or stainless steel connections. This will provide a tight seal and prevent leaking. Canada Supplies for Stainless Steel Hardware, Parts, Fittings and Connections Stainless Steel 1/2" MPT x 3/8" Compression 3 Piece Stainless Steel Ball Valve Stainless Steel 2 Piece Ball Valve Full Port - Stainless steel ball valve with a two-piece body and full port. Each end of the valve has 1/2" female pipe threads. All internal contact points are stainless steel. Brewer's hardware in Canada. Brew Supplies

Average Customer Review: 4.5 of 5 Total Reviews: 3 Write a review.

  0 of 0 people found the following review helpful:
 
Sturdy and Secure April 23, 2014
Reviewer: Paulster from Milton  
This thing is very sturdy, and my mash tun now takes about 200mL to clear - grain bed sets up very fast with this.  No issues using the small pump to transfer this 3/8" supply over to my BK which has a 1/2" pickup tube.

Make sure you've got the dip tube ALL THE WAY inside the compression fitting before you think you need to trim some off!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Good but... March 7, 2014
Reviewer: Will from Toronto  
Great false bottom, sturdy and the dip tube is included! but... i have no clue how to hook it up to my weldless bulkhead and spigot so that its air tight yet easy enough to remove for cleaning. Any Advice?

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Worth every penny! January 1, 2014
Reviewer: Paul Tanguay from Ottawa, ON Canada  
I had the 12" dome false bottom, but it never quite sat right, and vorlaufing was long and messy.  No issues with this, and 100% Stainless in the mash tun - very happy with that :D

Was this review helpful to you?