> Draft Equipment > Kegging & Dispensing > Sanke Keg Couplers > Standard Sanke Couplers >

Sanke "G" Style Keg Coupler With 304 S.S Probe - Squeeze Handle
Sanke "G" Style Keg Coupler - Squeeze Handle
This "G" Style Sanke Coupler is made out of chrome plated brass and has a 304 stainless steel probe. It features a high-capacity pressure relief valve that is build directly into the coupler body. When functioning with other relief devices in the system, it will prevent a keg from reaching pressures in excess of recommended working pressure. Also, it allows the user to relieve pressure when needing to prevent or correct dispensing problems. The pull lever handle is black and controls the flow of gas; up position is off, down position is on.

To install rotate clockwise on the keg valve until secure. Squeeze the lever handle and push down; this opens the keg valve and pressure inlet on the coupler. You are now ready to dispense. This coupler can be quickly dismantled for cleaning and periodic service. No special tools required.
Price: $72.99

Availability: Usually Ships in 24 Hours


Chrome Plated "G" Style Sanke Coupler With 304 Stainless Steel Probe - Squeeze Lever

  • Material: Brass
  • Finish: Chrome Plated
  • Tailpiece Material: Brass
  • Probe Material: 304 Stainless Steel
  • Type: "G" Style
  • Handle Type: Squeeze Handle
  • Tail Piece: 1/4" OD Barb
  • Beer Port Size: 7/8"-14 (5/8" BSP) (U.S. Beer Industry Standard)

Find Your Brand:
(Always confirm with the store when purchasing the keg if it will be compatible.)

Sanke Coupler Chart

Share your knowledge of this product with other customers...
Click here to write a review