> Hardware > Camlocks >

Silicone Camlock Gasket 1/2"
Silicone Gasket for 1/2" Stainless Steel Camlock Quick Disconnects
Note Regarding "Fit":

Some may find that occasionally the male and female camlocks can be a little more difficult to connect than usual from time to time. Specifically, that it can take some more effort to close the locking cam arms. In many cases this can be attributed to manufacturing tolerances from lot to lot. Something as simple as the thickness of the gasket can affect how much pressure is needed to push on the cam arms.
Price: $1.09

Availability: Usually Ships in 24 Hours


Silicone Camlock Gasket 1/2"

USA FDA Approved. Compatible with all 1/2" Female Style B, C, D & Dust Cap. Listed by the National Sanitation Foundation. (NSF 51).

If you find your mating pair to be difficult to close, consider the following tips before requesting a replacement or return:
  • Be sure to close both cam arms simultaneously, not one at a time.
  • While closing the cam arms, push the two fittings together to compress the gasket slightly.
  • A small amount of lubricant on the cams where the grooves contact helps (anything food grade such as vasoline to keg lube will work).
  • Break in the gaskets by leaving the mating pair connected for a few days, making it easier to re-connect in the future.

May we also suggest...
Stainless Steel Camlock Type D - Female Camlock x 1/2" Female NPT Stainless Steel Camlock Type C - Female Camlock x 1/2" Barb Stainless Steel Camlock Type B - Female Camlock x 1/2" Male NPT Stainless Steel Camlock - Female Dust Cap
Price: $8.99

Price: $8.49

Price: $8.49

Price: $6.89

Stainless Steel Type D Camlock - 1/2" Female Camlock x 1/2" Female NPT Stainless Steel Type C Camlock - 1/2" Female Camlock x 1/2" Hose Barb Stainless Steel Type B Camlock - 1/2" Female Camlock x 1/2" Male NPT. Stainless Steel Camlock Type DC - Female Dust Cap - Hardware for Brewer's in Canada. OBK Home Brew Parts, Fittings, Equipment Online

Average Customer Review: 4.5 of 5 Total Reviews: 2 Write a review.

  0 of 0 people found the following review helpful:
They are thick! May 13, 2016
Reviewer: James Osborne from Toronto, ON Canada  
Product is exactly what it says it is, but they are thick...very thick.  at least 3 times the thickness of the gaskets that my camlocks came with.

I cannot close the connection with my bare hands, in order to close the clamps I needed to use a 10 inch piece of pipe I had lying around as a lever.

When you do finally get it closed, it's compressed so much that it blocks half the hole on the connection.

This could very well be just the camlocks I have.

Before you order pull the old gasket out and have a look at the thickness, these ones are 5mm thick, the ones that came with with my camlocks are 2mm.

Good product, just not going to work with my equipment.  I ended up using a 210 Silocone O-ring inside my camlocks and it worked perfectly.

Was this review helpful to you?

  0 of 1 people found the following review helpful:
Good gasket December 2, 2013
Reviewer: Andrew Stevens from Chateauguay, QC Canada  
I used this for my cooler mash tun build and it sealed it up on the first shot.

Was this review helpful to you?