> Hardware > Lock Nuts, O-Rings, & Washers > O-Rings >

Silicone O-Ring (11/16" ID X 1" 3/16" OD)
Silicone O-Ring 5.7mm
This USA FDA Approved o-ring is made out of food grade silicone. Works great with 1/2" NPT fittings. Listed by the National Sanitation Foundation. (NSF 51).
Price: $0.99

Availability: Usually Ships in 24 Hours


Silicone O-Ring (Thick 11/16" ID x 1 3/16" OD)

  • Made out of food grade silicone
  • Replacement o-ring for all soda keg tank lids
Additional Details
Outside Diameter:Inside Diameter:Thickness:Material:Type:
1 3/16" (3.02cm)11/16" (1.75cm)1/4" (0.64cm)Food Grade SiliconeO-Ring

Average Customer Review: Average Customer Review: 4.5 of 5 4.5 of 5 Total Reviews: 2 Write a review.

  0 of 0 people found the following review helpful:
4 of 5 Works great November 6, 2016
Reviewer: Sebastien OB from QC Canada  
It doesn't leak, but it doesn't fit in the groove of the 1/2'' npt nut. Make sure you order the ''thin'' version  if you use the nut.

Wasn't clear which one to use, anyway it doesn't leak, that's the principal!


Was this review helpful to you?

  0 of 0 people found the following review helpful:
5 of 5 works February 10, 2015
Reviewer: Brian Markley from Edmonton, AB Canada  
stopped the leak. They are a fairly thick gasket so make sure you have some thread to work with. I bought two. One for the inside and one for the outside of my pot, but only had enough thread on my fitting (not from OBK) for a gasket on the inside. It still stopped all leaks and did the trick.

Was this review helpful to you?