> Draft Equipment > Kegging & Dispensing >

Single Tap Kegerator Kit (Sanke D Coupler)
Single Tap Kegerator Kit for Commercial Sanke Kegs
American 'D" coupler is the coupler you want for kegs from the beer store. This coupler comes with a 5/16th hose barb for your gas line.

Premium Taprite T742HP-02 regulator. Approved for use by all major breweries. It has a new adjustment system that allows pressure to be easily adjusted by hand (no tools required!). Shutoff Valve is ball type check valve that prevents product back-up into regulator. Solid brass body with extra long nipple. Regulator has "Shut down" safety system (blow off at 55 to 60 PSI.)

Permanent Quad-Ring Seal on inlet nipple helps eliminate a source of leaks... no need to use a new fiber washer each time tank is changed.

Heavy duty UL rated dual gauges. LH threaded ports with CGA 320 shank and nut.

Optional CO2 Tank. Manufactured recently these will not need to be retested for five years. Every Co2 cylinder is produced from high strength aluminum alloy 6061-T6. These tanks are popular because they are not as heavy as steel tanks and do not rust. The service pressure is up to 1800 PSI/124 BAR with a test pressure of 3000 PSI/207 BAR. These cylinders are stamped with required U.S. Department of Transportation and Transport Canada Markings. The 320 Valves are CGA approved, and have a male thread for Co2 Regulators.
Price: $189.99

Price with Selected Options: $189.99

Availability: Usually Ships in 24 Hours

CO2 Tank Options


Free Faucet (Upgradable)

Choose Your Drip Tray

Bevlex Beer Line Length

Choose Your Tap Handle

Add a Faucet Wrench


Single Tap Kegerator Kit (Sanke D Coupler)

Everything but the beer and fridge. This kit is designed to have all the parts you need to put a faucet through a fridge door or small wall and dispense the common domestic beers found in North America.

Kit Includes:
  • Taprite Dual Gauge Regulator
  • Sanke "D" Coupler
  • 6' of Bevlex 200 Beer Line
  • 4' of Ultraflex Gas Tubing
  • Chrome Plated Faucet with Tap Handle (Optional Upgrade to Perlick 630SS)
  • 4 1/8" Stainless Steel Beer Shank
  • Stainless Steel Tail Piece Assembly
  • Stainless Steel Hose Clamps

*New (Empty) Luxfer Aluminum CO2 Tank is Optional

Average Customer Review: Average Customer Review: 5 of 5 5 of 5 Total Reviews: 5 Write a review.

  0 of 0 people found the following review helpful:
5 of 5 Amazing starter kit August 12, 2017
Reviewer: Scott from Winnipeg  
Bought this to use with my keg setup. Was easy to install, I just had to cut one hole in the fridge. Comes with everything you need. Find a local place to fill your CO2 and you'll be serving draft beer in no time at all.

Was this review helpful to you?

  1 of 1 people found the following review helpful:
5 of 5 Nice products/quality December 17, 2014
Reviewer: Steve Houle from Quebec, QC Canada  
I bought this kit for a new Kegerator and everything needed was provided.  Just make sure to install the flare washer between the gas hose and the regulator (it is located at the back of the regulator box!)  No leak at all!

Highly recommanded kit.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
5 of 5 Great Product September 25, 2013
Reviewer: Adam from Huntsville, ON Canada  
Initially had an issue with the regulator (old style) send a new Taprite asap, and easily hooked up and worked excellent.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
5 of 5 1st timer September 12, 2013
Reviewer: John Mitchell from ottawa, ON Canada  
Im an absolute noob at this, but the kit was simple to install, and I was enjoying a pint in no time...why didnt I do this sooner.
 Thanks OBK

Was this review helpful to you?

  0 of 0 people found the following review helpful:
5 of 5 Installed in minutes October 7, 2012
Reviewer: Rob Templeton from London, ON Canada  
Had a few small problems with install. Called them up and they walked me through it in less then 2 minutes. Thank you!


Was this review helpful to you?