> Draft Equipment > Kegging & Dispensing >

Single Tap Kegerator Kit (Sanke S Coupler)
Single Tap Kegerator Kit for Commercial Sanke Kegs
 
Everything but the beer and fridge. This kit is designed to have all the parts you need to put a faucet through a fridge door or small wall and dispense beer. "S" system is used by many European breweries, also known as European Sankey.

Price: $189.99

Price with Selected Options: $189.99

Availability: Usually Ships in 24 Hours

CO2 Tank Options


Regulator


Choose Your Faucet


Choose Your Drip Tray


Bevlex Beer Line Length:


Add a Faucet Wrench



Quantity:  
Features
 

Single Tap Kegerator Kit (Sanke S Coupler)



Kit Includes:

  • Taprite Dual Gauge Regulator

  • Sanke "S" Coupler

  • 6' of Bevlex 200 Beer Line & 4' of Ultraflex Gas Tubing  

  • Chrome Plated Faucet (with Tap Handle) + 4 1/8" Chrome Plated Beer Shank (with Tail Piece Assembly)

  • Stainless Steel Hose Clamps



*New (empty) Aluminum CO2 Tank is Optional
Instructions
Premium Taprite T742HP-02 regulator. Approved for use by all major breweries. It has a new adjustment system that allows pressure to be easily adjusted by hand (no tools required!). Shutoff Valve is ball type check valve that prevents product back-up into regulator. Solid brass body with extra long nipple. Regulator has "Shut down" safety system (blow off at 55 to 60 PSI.) Permanent Quad-Ring Seal on inlet nipple helps eliminate a source of leaks... no need to use a new fiber washer each time tank is changed. Heavy duty UL rated dual gauges. LH threaded ports with CGA 320 shank and nut. Optional CO2 Tank. Manufactured recently these will not need to be retested for five years. Every Co2 cylinder is produced from high strength aluminum alloy 6061-T6. These tanks are popular because they are not as heavy as steel tanks and do not rust. The service pressure is up to 1800 PSI/124 BAR with a test pressure of 3000 PSI/207 BAR. These cylinders are stamped with required U.S. Department of Transportation and Transport Canada Markings. The 320 Valves are CGA approved, and have a male thread for Co2 Regulators.

Share your knowledge of this product with other customers...
Click here to write a review