> Brewing Equipment >

Spotted Python Stainless Steel Immersion Wort Chiller - 50' x 1/2" with Vinyl Tubing
Spotted Python Stainless Steel Immersion Wort Chiller - 50' x 1/2" with Vinyl Tubing - Made in Canada
 
Alternative Views:


A premium immersion chiller made with 50 feet of 1/2" OD, 304 stainless steel. This gorgeous unit is designed to chill five gallons of hot wort in as little as ten minutes, but is capable of cooling larger batches as well.

Whether you're brewing with extract or all-grain, bringing down the temperature of the wort quickly in order to pitch the yeast is an essential step in homebrewing. Lowering the temperature quickly reduces chances of contaminating your beer with wild yeasts and bacteria, and will reduce the levels of DMS (dimethyl sulfide) that can ruin a beer's aroma. A quick chilling of the wort will also improve clarity in the final product.

The Stainless Steel Wort Chillers are more durable and hygienic products compared to the copper variety due to being made of 1/2" 304 Stainless Steel. The resiliency that these wort chillers provide is unmatched, giving you both an incredibly strong and long lasting wort chiller. The hygienic properties of stainless steel outmatch traditional copper, in addition Stainless Steel is a far easier to clean metal.

When using an immersion chiller there's no unnecessary transferring to different containers, and there's no need to dilute the wort with cold water. Just drop the immersion chiller in to the brew pot. The preferred method of sanitation is to make sure it is clean to the eye and submerge the coil portion of the chiller in to the wort during the last 15 minutes of the boil, this will kill any wild yeasts or unsanitary pests that might be introduced. Once the brew pot is taken off the boil, you can begin cooling immediately by hooking up the line and turning on the water.
Price: $148.99

Availability: Usually Ships in 24 Hours
Quantity:

Features
 

Spotted Python Stainless Steel Immersion Wort Chiller - 50' x 1/2" with Vinyl Tubing

Assembly is Required.

Includes:
  • (1) 8' length of clear vinyl tubing (hose ships as one piece allowing you to cut to your desired length)
  • (3) strong Stainless Steel Hose Clamp (Large)
  • (1) 1/2" heavy duty female swivel garden hose fitting
  • (1) instructions

Approximate Chiller Dimensions:
  • 10 1/4" coil outside diameter
  • 12 1/4" coil height
  • 13 3/4" inlet/outlet height
  • 26" total height
  • Covers Surface Area of 942.48"

Average Customer Review: 4 of 5 Total Reviews: 1 Write a review.

  0 of 0 people found the following review helpful:
 
You will Need to Buy High Heat Hose April 25, 2018
Reviewer: Lance Belanger from North Bay, ON Canada  
Used this chiller once and the inlet hose nearly melted (and exploded) because the ends of the chiller don't extend past my brew kettle, allowing a lot of heat to hit the cheap vinyl tubing. If the Stainless ends don't extend past the pot then you will need to buy about $10 worth of high-heat silicon tubing. Kind of crappy they offer this amazingly efficient chiller with such crappy tubing.

Was this review helpful to you?