> Brewing Equipment > Ss Brewtech > Ss Brewtech Conicals > Ss Brewtech Brew Buckets >

Ss BrewTech 14 Gallon Brewmaster Brew Bucket Fermenter
Ss BrewTech 14 Gallon Brewmaster Brew Bucket Fermenter
 
Alternative Views:


The Ss BrewTech 14 Gallon Brewmaster Brew Bucket Fermenter provides all the great features of the brew bucket you have come to love, but introduces new components making the Brewmaster a suitable follow-up to the previous brew bucket. This model doubles the capacity of the standard brew bucket, providing a larger alternative that is sure to fit the needs of brewers looking to make larger batches.

Due to feedback from brewers, Ss Brewtech has added a high quality weldless thermowell and a easy to read LCD thermometer. Adding these two parts eliminates the risks associated with installing your own thermowell, as well as providing a more comprehensive and useful temperature gauging experience compared to stick-on type thermometers. As with it's popular previous incarnation, the Brewmaster Bucket allows you to easily stack multiples on top of one another during fermentation. Another key aspect is it's conical base, allowing trub to settle at the bottom in a concentrated space minimizing the surface area that your beer is in contact with the trub during fermentation.

Included also are a rotating racking arm, and a ball valve spigot assembly.
Price: $459.99

Availability: Usually Ships in 24 Hours
Quantity:

Features
 

Ss BrewTech 14 Gallon Brewmaster Brew Bucket Fermenter


Features:
  • Certified food grade 304 stainless steel
  • 14 gallon maximum capacity
  • Stackable during ferment
  • Stackable for storage
  • Carry handles on sides, move when full!
  • 17 mm lid hole and included stopper
  • Food grade silicone lid gasket
  • Conical bottom to trap trub
  • Included 3/8" ball valve with hose barb
  • Take gravity samples from bottom ball valve
  • Rotatable racking arm
  • Weldless Thermowell and LCD Thermometer
  • Gallon markings inside for volume visual (starts at 2 gallons)

Dimensions:
  • 24" Height
  • 16" Diameter

Average Customer Review: 4 of 5 Total Reviews: 1 Write a review.

  0 of 0 people found the following review helpful:
 
Shiny makes everyone smile! October 2, 2018
Reviewer: Dan Brenner from Thamesford , ON Canada  
This piece of equipment will make a fine addition to any brewers arsenal. It is constructed with quality craftsmanship. (Designed in USA, made in China)
It is easy to clean, easy to look at , and fairly easy on the wallet compared to other similar options.
I don't have many negative points, but there are some.

1. It should come with wheels.
   I added some to mine, this thing is a bit of a beast when full and wheels are almost a must.

2. The hole in the top is too small.
    A 1/2" ID silicone tube will not fit through, I prefer to fill with the lid on. Also dry hopping is nearly impossible
through such a tiny hole so again the lid had to come off.

3. The barb at the end of the valve is way too close to the ground.
   There are workarounds to pull hydrometer samples from it, but in my opinion the legs should be longer to raise the height of  the whole unit.

All in all I am very happy with this purchase and am quite certain it will be used for many years to come!

Was this review helpful to you?