> Brewing Equipment > Ss Brewtech > Ss Brewtech Conicals > Ss Brewtech FTSs > Ss Brewtech FTSs | Chilling Only >

Ss Brewtech Brew Bucket FTSs (Chilling Only) - 7 Gallon
FTSs Temperature Control for Brew Bucket
 
Alternative Views:


Compatible with both Standard and Brew Master Edition Brew Buckets

Chill your beer in the summer and warm your beer in the winter!! Use a chill water source when it's hot or warmed water if it's cold! And move hot wort from your brew kettle and go for one stop chilling in your fermenter! As soon as your wort is ready for transfer from your brew kettle, just move it over to one of our Ss fermenters and then take advantage of the FTSs chiller coil we have in your beer to bring down to pitching temps!

Temperature control during fermentation is one of the most significant contributors to the flavor of our beers, yet it all too often gets overlooked. For centuries brewers have limited the styles of beers they produced to the varying temperatures of the seasons. That didn't work for us, so we poured a few pints and took a fresh look at this age-old problem. The Fermentation Temperature Stabilization System (FTSs) is the result of applying the science of thermodynamics with what we've learned from our experience in the craft brewing industry. The system is elegant and engineered, yet it stays true to the heart and soul of us home brewers.

The FTSs uses a precision digital temperature controller in combination with a 304 stainless steel immersion chiller. The digital controller constantly monitors your beer's temperature and will activate the circulation pump to hold the fermentation temperature at your predetermined set point. You can crash cool or lager too! You supply the chill water source, which can be as simple as ice water in a cooler or as involved as glycol from a chiller's reservoir. We supply the rest of the system. As long time fellow home brewers, this is a system we know many of you have been dreaming about for a long time: advanced temperature control for the beers you make at an affordable price.
Price: $304.99

Price with Selected Options: $304.99

Availability: Usually Ships in 24 Hours

Add Controller Mounting Bracket?



Quantity:
Features
 

Ss Brewtech FTSs Temperature Control for Brew Bucket Fermenters

Specifications:
  • Fermentation Temp Stabilization System (FTSs)
  • Chill beer in Summer/ warm beer in Winter!!!
  • Chill from 0.5-2 degrees F per minute*
  • Warm beer using fish tank heater in winter!
  • Custom lid w/ 304 Ss immersion chiller coil!
  • FTSs lid / coil SAME for Bucket and Chronical 7!
  • 304 Ss weldless lid mounted thermowell
  • Digital temperature controller
  • Accurately monitor/control temps!
  • Pro grade submersible pump
  • Included vinyl tubing
  • 110-240V 3A power supply (global use)
  • Tailored neoprene insulation jacket!
  • You supply the chill / warm water source...
  • Could be as simple as an ice chest/cooler!
  • We supply the rest!


Having issues with your FTSs controller? Try any of the following.

Perform a Factory Reset

Reprogram Temperature or Controller Settings

FTSs Help Center

Average Customer Review: 5 of 5 Total Reviews: 1 Write a review.

  2 of 2 people found the following review helpful:
 
FTSs Temperature Control for Brew Bucket December 15, 2014
Reviewer: Pat from Quebec  
Work very good!!!! Easy to install.the pump is very quiet. Nice temp precision.....

Was this review helpful to you?