> Brewing Equipment > Ss Brewtech > Ss Brewtech Kettles & Accessories >

Ss Brewtech Brew Kettle - 15 Gallon
Ss BrewTech 15 Gallon Brew Kettle
Alternative Views:

OBK is proud to announce we are the Canadian distributor for Ss Brewing Technologies. Retailers may contact us for bulk pricing and access to our wholesale section.

This brew kettle is certified food grade 304 stainless steel with a tri-clad bottom. Included is a 3 piece 304 ss ball valve, pick up tube and trub dam. The kettle also includes two plugged drilled holes that can accommodate weldless accessories.

Looking to add a thermometer? We recommend the Ss Brewtech Threaded Bulkhead Thermometer.

We recommend you purchase this product by itself. Shipping items inside the pot increases chances of damage during shipping. We will of course ship items inside a pot if you want. But we can not assume liability for damage if you choose to do so.

Full Kettle Comparison Chart

Price: $315.99

Availability: Usually Ships in 24 Hours


Ss BrewTech 15 Gallon Brew Kettle

  • Heavy Duty 304 18-Gauge Stainless Steel
  • Brushed Stainless Steel
  • 15 Gallon Capacity
  • Graduated markings (both litres and gallons)
  • 5mm Tri-clad Bottom. Induction Ready
  • Strong sturdy lid that rests on the side handles
  • Bolted on riveted silicone handles
  • Rimmed Lid
  • 7/8" Re-Circulation Port
  • Weldless Fittings

  • Stainless Steel 3-Piece Ball Valve
  • Stainless Steel Compression Fitting Plug - 22mm
  • Rotating Pick-Up Tube

Interior Kettle Dimensions:
  • 18 5/8" Height (47.31cm)
  • 15 3/4" Diameter (40cm)

Exterior Kettle Dimensions (Handles Included):
  • 20" Height (50.8cm)
  • 20 1/2" Diameter (52.07cm)

Full Kettle Comparison Chart

May we also suggest...
Bar Keepers Friend Cleanser and Polish Powder (12 oz) Stainless Steel Fitting - 1/2" Male NPT X 1/2" OD Barb
Price: $5.79

Price: $4.49

Bar Keepers Friend Cleanser and Polish Powder (12 oz) Stainless Steel 1/2" MPT (Male Pipe Thread) x 1/2" Barb Fitting

Average Customer Review: Average Customer Review: 4.5 of 5 4.5 of 5 Total Reviews: 4 Write a review.

  1 of 1 people found the following review helpful:
4 of 5 Good kettle March 6, 2020
Reviewer: Will from Victoria BC  
Agree with Russ about the welded vs weldless fittings and spinning.  The whirlpool hole sits just a bit too high for 5 gallon batches so you'll really have to throttle down your pump if you want to us it for 5 g batches otherwise you'll get lots of splashing and foam.

Wish OBK stocked the updated version since they're the sole distributor.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
4 of 5 Decent Weldless Kettle March 18, 2018
Reviewer: Russ from Surrey BC  
Bought 3 of these units and set up a HERMS rig for myself when they went on a OBK super sale.   Love the kettles, they are absolutely beautiful.   I do wish I'd sprung for the welded fittings as the weldless ones have a tendancy to spin slightly when you're trying to open/close the ball valves.

However, if you add a 7/8" ID slim washer (also available from OBK) on valve/kettle junction it will stiffen up the kettle and help stop the spinning.

I used OBK's service to custom cut the electric element holes in the kettle and definitely loved the service.

Make sure you grab a bottle of StarSan as well with this so you can passivate it properly to take care of it.   Happy Brewing!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
5 of 5 Amazing January 31, 2018
Reviewer: Brian from Calgary, AB Canada  
After coping with a less than ideal kettle for my early brewing career, I decided to upgrade to a lifer kettle. This is what I chose. I have run two batches so far and am very pleased. Incredibly high quality construction, solid components and great feel (and look, who's kidding who). I added a thermometer to my kettle as I find it handy for heating strike water and chilling wort. Volume markers are so key for a brew kettle, and these ones are clear and they seem durable. My kettle came with a faulty trub trap nut / dip tube (from SS brewtech), but OBK sent a return slip immediately and had a replacement part back to me within the week, so no points lost. Honestly, such a good value for such a pro piece of equipment.

Was this review helpful to you?

  5 of 5 people found the following review helpful:
5 of 5 Monster Brew Kettle July 17, 2016
Reviewer: Jarrod from Vancouver, BC  
My jump to all grain started with this fantastic brew kettle. This thing is a monster, I was in shock when I first opened it. It performed very well and cleaned up super easily. I would highly recommend this kettle to anyone looking at 10 gallon batches.

Was this review helpful to you?