> Brewing Equipment > Ss Brewtech > Ss Brewtech Mash Tuns >

Ss Brewtech Infussion Mash Tun - 20 Gallon (Celcius)
Ss Brewtech 20 Gallon InfuSsion Mash Tun
 
Alternative Views:
OBK is proud to announce we are the Canadian distributor for Ss Brewing Technologies. Retailers may contact us for bulk pricing and access to our wholesale section.

The mash tun is a brewing vessel used by home brewers during the steeping process of the malt. This step is crucial as it allows the starches of the milled malted barley to seep into the liquor or liquid to create the wort. Enzymatic actions take place that will convert the starch into maltose.

The Ss Brewtech 20 Gallon InfuSsion Mash Tun is designed for infusion mashing. Infusion mashing is a process of achieving the mash temperature by slowly adding measured amounts of heated water to achieve the needed temperature for a period of time. This is the reason why a mash tun should have an insulated body to be able to maintain a hot temperature. Mash Tun from Ss Brewing Technologies is targeted at brewers doing infusion mashing in insulated plastic coolers and are looking for a better performing piece of equipment made of 304 Stainless Steel that is purposefully built for brewing. In side by side testing, the 10 gallon InfuSsion Mash Tun showed 5F less of temperature decay over a 60 minute mash as compared to a similarly sized plastic cooler. The InfuSsion Mash Tuns also have a concave recess under the false bottom that has a center located drain that plumbs out to a 1/2" ball valve. By locating the drain port in the middle we are able to get better uniformity and efficiency through the grain bed versus traditional plastic cooler setups.

Features Celcius Thermometer

PLEASE NOTE: These cannot be used in direct-fire applications. Do not use over a burner.
Price: $749.99

Availability: Usually Ships in 24 Hours
Quantity:

Features
 

Ss Brewtech 20 Gallon InfuSsion Mash Tun (Celcius)

Specifications:
  • Heavy Duty 304 18-Gauge Stainless Steel
  • Polished Stainless Steel
  • 20 Gallon Capacity
  • Internal graduated markings (both litres and gallons)
  • 1" Thick insulated lid and walls
  • Better temperature retention than plastic
  • Ultra high efficiency mashing
  • Gives clear wort
  • Sets grain bed very efficiently
  • 5 degree sloped bottom
  • Conical bottom with center drain
  • No dead space
  • Foam insulated lid for heat retention
  • Can not direct fire heat with burner
  • LCD temperature display
  • 7/8" Recirculation Hole

Includes:
  • Stainless Steel 3-Piece Ball Valve
  • Stainless Steel Thermowell
  • Stainless Steel False Bottom with Silicone Gasket
  • Stainless Steel Bulkhead and Plug

Dimensions:
  • 28" Height (71.12cm)
  • 19 3/4" Diameter (50.17cm)

Average Customer Review: Average Customer Review: 5 of 5 5 of 5 Total Reviews: 1 Write a review.

  4 of 4 people found the following review helpful:
 
5 of 5 Holds temp November 21, 2017
Reviewer: Keith Powell from Edmonton  
Wow does this mash tun work great for single infusion mashing. Over a 60 min mash with the vessel pre heated, I only lost 1.2 C. I'm looking at adding a RIMS set up to it and with the added bulkhead at the top of the tun this should be no trouble at all. The false bottom fits tightly and I've never had any of the grist get by. Overall I'm very happy with this tun. It's a fair amount to shell out, but I can say it's one of the best tuns I've seen.

Was this review helpful to you?