> Brewing Equipment > Ss Brewtech > Ss Brewtech Mash Tuns >

Ss Brewtech Mash Tun - 10 Gallon (Celcius)
Ss Brewtech 10 Gallon Mash Tun (Celcius)
Alternative Views:

OBK is proud to announce we are the Canadian distributor for Ss Brewing Technologies. Retailers may contact us for bulk pricing and access to our wholesale section.

The mash tun is a brewing vessel used by home brewers during the steeping process of the malt. This step is crucial as it allows the starches of the milled malted barley to seep into the liquor or liquid to create the wort. Enzymatic actions take place that will convert the starch into maltose.

The SS Brewtech 10 Gallon Mash Tun is designed for infusion mashing. Infusion mashing is a process of achieving the mash temperature by slowly adding measured amounts of heated water to achieve the needed temperature for a period of time. This is the reason why a mash tun should have an insulated body to be able to maintain a hot temperature. This 10 gallon mash tun from Ss Brewing Technologies is targeted at brewers doing infusion mashing in insulated plastic coolers that are looking for a better performing piece of equipment, such as this one that is made of 304 Stainless Steel that is purposefully built for brewing. The Mash Tuns also have a concave recess under the false bottom that has a center located drain that plumbs out to a 1/2" ball valve. By locating the drain port in the middle we are able to get better uniformity and efficiency through the grain bed versus traditional plastic cooler setups.

Features Celcius Thermometer

PLEASE NOTE: These cannot be used in direct-fire applications. Do not use over a burner.
Price: $529.99
Sale Price: $449.99
Save $80.00!

Availability: Usually Ships in 24 Hours


Ss Brewtech 10 Gallon Mash Tun (Celcius)

  • 10 gallon capacity
  • Foam insulated dual walls(304Ss)
  • Better temperature retention than plastic
  • Ultra high efficiency mashing
  • Gives clear wort
  • Sets grain bed very efficiently
  • 5 degree sloped bottom
  • Center drain
  • Conical bottom with drain
  • No dead space
  • Foam insulated lid for heat retention
  • Can not direct fire heat with burner
  • Internal volume markings starting at 1 gallon
  • Electrically etched volume markings
  • Volume markings in both liters and gallons
  • Includes false bottom with silicone gasket
  • Includes thermowell
  • Includes precision LCD thermometer (Celcius)
  • Includes high quality 304 Ss 3 piece ball valve

This item ships by itself

Average Customer Review: Average Customer Review: 4 of 5 4 of 5 Total Reviews: 6 Write a review.

  0 of 0 people found the following review helpful:
4 of 5 preheat this beast! April 25, 2018
Reviewer: Chris Watt from Victoria, BC Canada  
Solid strong construction.  A lot of thought was put into this beauty.  The false bottom and o-ring are top notch.  The 'feet' can come off easily, but also go back on easily so no big deal.  The thermometer's wire probe is not quite long enough for the mash tun's probe so I use a different thermometer for more accurate readings.  Be sure to preheat with 75-80 degree C strike water for 10+ minutes before mashing in.  I find that temperature works well and then you can drain off what you don't need for your mash and you should be good to go.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
3 of 5 Looks sexy, but hardly holds the temp March 18, 2018
Reviewer: Marc-Andre from Saint-Eustache  
Even when pre-heating the tun like suggested by SS Brewtech I lose more heat than I should, and it seems like a common issue. This is usually due to the cover letting steam out, some say you should put weight on it, others recommend putting a thin aluminium foil on top of the grain bed to make sure head space is not a factor. I personnally use the MTSs with it and it solved my issues. still a bit disappointing for the price IMO.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
2 of 5 No recirculation port like SS brewtech site says February 27, 2018
Reviewer: Ryan from NB  
Unit came not equipped with top recirculation port as it says on the ss brew tech website. Although OBK website not saying it had this feature it also didn't say it didn't have it. Great product minus missing feature. OBK ignored my request for compromise to this issue such as splitting cost of retrofit kit but rather just saying i can return this very heavy vessel on my own dime which i had already paid to get it shipped to my house. Poor customer service in my opinion.

Was this review helpful to you?

  2 of 2 people found the following review helpful:
4 of 5 Great product except for one thing... March 21, 2017
Reviewer: Christopher Watt from Victoria, BC Canada  
Have had this mash tun for almost a year now and I have to say I love it.  My efficiency has been holding between 75-85% and I am certainly happy with that.  The only problem is the thermometer that comes with this mash tun.  The first thermometer that came with it was broken, OBK gladly sent me a new one at no charge.  Now the second one has called it quits.  Also, I never found the reading quite accurate when I took secondary temperatures directly into the mash.  Can't say I'll miss the thermometer but I'd expect SS Brewtech to use a higher quality thermometer.

Was this review helpful to you?

  2 of 2 people found the following review helpful:
5 of 5 Fantastic Mash tun January 19, 2017
Reviewer: Eric Jourdan from Calgary, AB Canada  
I received this as a Christmas gift from my wife (meaning I found it on sale and she told me to order it).  It's a really fantastic mash tun.  I lost about 1/2 a degree C during a 60 min mash outside at -5°C.  When I started to run off, I found the flow to be much faster than necessary, no chance of a stuck sparge.  Vorlauf was quick and easy!

I brewed a 10 gallon batch with about 23 pounds of grain for my first batch with the mash tun.  This was about it's max, I think it would probably fit about 25 pounds of grain,  if you mash very dry.  But thanks to great efficiency (91%), this yielded 10 gallons of wort in the mid 1.070's.  

Overall I am extremely happy with my purchase.  I wish the sparge arm (not included) could be used with the lid on, but I just sparged with a silicon tube and a piece of foil to protect the grain bed.  I'm considering cutting a hole in the lid for sparging.

Was this review helpful to you?

View All Customer Reviews