> Hardware > Camlocks >

Stainless Steel Camlock - Female Dust Cap
Stainless Steel Camlock Type DC - Female Dust Cap - Hardware for Brewer's in Canada. OBK Home Brew Parts, Fittings, Equipment Online
 
Alternative Views:


Compatible with Type A, E, F.

Note Regarding "Fit":

Some may find that occasionally the male and female camlocks can be a little more difficult to connect than usual from time to time. Specifically, that it can take some more effort to close the locking cam arms. In many cases this can be attributed to manufacturing tolerances from lot to lot. Something as simple as the thickness of the gasket can affect how much pressure is needed to push on the cam arms.
Price: $6.89

Availability: Usually Ships in 24 Hours
Quantity:

Features
 

Stainless Steel Camlock - Female Dust Cap

If you find your mating pair to be difficult to close, consider the following tips before requesting a replacement or return:
  • Be sure to close both cam arms simultaneously, not one at a time.
  • While closing the cam arms, push the two fittings together to compress the gasket slightly.
  • A small amount of lubricant on the cams where the grooves contact helps (anything food grade such as vasoline to keg lube will work).
  • Break in the gaskets by leaving the mating pair connected for a few days, making it easier to reconnect in the future.
  • 1/2" Camlock
  • 304 Stainless Steel

May we also suggest...
Stainless Steel Camlock Type A - Male Camlock x 1/2" Female NPT Stainless Steel Camlock Type F - Male Camlock x 1/2" Male NPT Stainless Steel Camlock Type E - Male Camlock x 1/2" Barb
Price: $5.29

Add
Price: $5.29

Add
Price: $5.49

Add
Stainless Steel Type A Camlock - 1/2" Male Camlock Connector x 1/2" Female NPT. Commonly attached to pumps, plate chillers, and stationary brewing equipment. Compatible with Type B, C, D. - Quick Disconnects and Brewer's Hardware Canada OBK Online Supply Stainless Steel Type F Camlock - 1/2" Male Camlock x 1/2" Male NPT Stainless Steel Type E Camlock - 1/2" Male Camlock x 1/2"

Average Customer Review: 5 of 5 Total Reviews: 2 Write a review.

  0 of 0 people found the following review helpful:
 
Worked well with my pre-existing cam-locks August 31, 2013
Reviewer: Kevin Miller from Ottawa, ON Canada  
No issues with fit.. great product as always!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Dust Caps are sweet July 28, 2013
Reviewer: Evan Gillis from Ottawa, ON Canada  
I find these dust caps are excellent. I have always had my setup covered but didn't have a good way to cover up my pump camlocks until now. less dust/pollen around my pump the happier I am.

Was this review helpful to you?