> Brewing Equipment >

Stainless Steel Camlock Type C - Female Camlock x 1/2" Barb
Stainless Steel Type C Camlock - 1/2" Female Camlock x 1/2" Hose Barb
 
Alternative Views:


Stainless Steel Type C Camlock - 1/2" Female Camlock x 1/2" Hose Barb (Includes Installed Gasket) Use this barbed fitting to connect onto a male camlock. Add hose to your barb for quick connecting and disconnecting when you need it. The barb is 3/8" ID for very little reduction in flow. Compatible with Type A, E, F & Dust Plug.

Note Regarding "Fit":
Some may find that occasionally the male and female camlocks can be a little more difficult to connect than usual from time to time. Specifically, that it can take some more effort to close the locking cam arms. In many cases this can be attributed to manufacturing tolerances from lot to lot. Something as simple as the thickness of the gasket can affect how much pressure is needed to push on the cam arms.

Price: $8.29

Availability: Usually Ships in 24 Hours
Quantity:

Features
 

Stainless Steel Camlock Type C - Female Camlock x 1/2" Barb

If you find your mating pair to be difficult to close, consider the following tips before requesting a replacement or return:
  • Be sure to close both cam arms simultaneously, not one at a time
  • While closing the cam arms, push the two fittings together to compress the gasket slightly
  • A small amount of lubricant on the cams where the grooves contact helps (anything food grade such as vasoline to keg lube will work)
  • Break in the gaskets by leaving the mating pair connected for a few days, making it easier to re-connect in the future

May we also suggest...
Stainless Steel Camlock Type E - Male Camlock x 1/2" Barb Stainless Steel Camlock Type A - Male Camlock x 1/2" Female NPT Stainless Steel Camlock Type F - Male Camlock x 1/2" Male NPT Stainless Steel Camlock - Male Dust Plug
Price: $5.49

Add
Price: $5.29

Add
Price: $5.29

Add
Price: $4.89

Add
Stainless Steel Type E Camlock - 1/2" Male Camlock x 1/2" Stainless Steel Type A Camlock - 1/2" Male Camlock Connector x 1/2" Female NPT. Commonly attached to pumps, plate chillers, and stationary brewing equipment. Compatible with Type B, C, D. - Quick Disconnects and Brewer's Hardware Canada OBK Online Supply Stainless Steel Type F Camlock - 1/2" Male Camlock x 1/2" Male NPT Stainless Steel Camlock Type DP - Male Dust Cap - Hardware for Brewer's in Canada. OBK Home Brew Parts, Fittings, Equipment Online

Average Customer Review: 4.5 of 5 Total Reviews: 7 Write a review.

  0 of 0 people found the following review helpful:
 
need some time to work November 3, 2017
Reviewer: C  
couldn't close one of the levers at the beginning by hand. hammered it in on the vice, then perhaps another 5x by hand were a bit hard.
since then works very smooth. wouldn't hesitate to buy again and go through the trouble since they are only $6

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Great Product February 23, 2016
Reviewer: Richard DeGrace from Grand Bay-Westfield, NB Canada  
I've been using these locks for several years now. They are 100% reliable, no leaks.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Great product August 18, 2015
Reviewer: Jason from Gatineau, QC Canada  
I ordered 4 and used them on my hoses.  I use the male camlocks on my equipment.  These work like a charm without leaks.

The first time I used them, they were a bit stiff, after locking and unlocking a few times they operate much smoother.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Good for lower pressures. June 28, 2014
Reviewer: Todd from ON Canada  
The gasket inside is a little on the thin side. Works very well with the pressures from a chugger pump and holds well, easy to engage, but with home water pressures will leak a little.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Leak free and great fit September 19, 2013
Reviewer: Vic from Mississauga, ON Canada  
Run your high temp 1/2" hoses under hot water for a few seconds and these fittings will slide in (with just a bit of pushing). I have 4 of these and they are absolutely leak free. Closing the arms down to create a seal takes a bit of practice, but they work just great

Was this review helpful to you?

View All Customer Reviews