> Hardware >

Stainless Steel Weldless Cooler Bulkhead - 1/2" NPT
Stainless Steel 1/2" NPT. Primary use is for coolers.
 
This cooler bulkhead is made using 304 stainless steel hardware, in addition it includes two high temperature silicone o-rings.

It is 2 1/2" in length and perfect for coolers with a wall thickness between 1/4" and 5/8".

A pre-drilled hole that is 7/8" in size is required for installation.
Price: $16.49

Availability: Usually Ships in 24 Hours
Quantity:

Features
 

Stainless Steel Weldless Cooler Bulkhead - 1/2" NPT

Details:
  • Made out of 304 stainless steel
  • 1/2" NPT
  • Silicone o-rings x 2
  • Minimum wall thickness of 1/4"
  • Maximum wall thickness of 5/8"
  • Total length of 2 1/2"
  • Requires a pre-drilled hole that is 7/8" in size for installation

For thinner wall coolers please consider the bulkhead that we use:
CLICK HERE FOR THIN WALLS

Measure before ordering.

Average Customer Review: 5 of 5 Total Reviews: 4 Write a review.

  2 of 2 people found the following review helpful:
 
Fits 70qt Coleman Xtreme Cooler April 30, 2014
Reviewer: Josh Morrison from Regina  
For those wondering, the long nipple is JUST long enough to fit on a 70QT Coleman Xtreme Cooler.  I filled the cooler up and let it sit for 24 hours without a drip.  Thanks OBK.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Great product September 4, 2013
Reviewer: stonerooster2013@gmail.com from Montreal, QC Canada  
Affordable, practical, and clean. All things that every home-brewer ought to be thinking about when setting up their brew station.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Works great! August 4, 2013
Reviewer: Ryan Keller from Winnipeg MB  
Already had the ball valve, didn't know the grade of stainless my warsteiner keg was, so I got this weldless bulkhead and it worked like a charm! Thanks OBK!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
perfect July 29, 2013
Reviewer: Brent Crawford from London, ON Canada  
I picked up one of these to convert my 10 gallon igloo cooler into a mash tun.  The setup works perfectly. The o-ring and nut provided sealed perfectly without any messing around. I just attached a ball valve to the nipple provided, and a barb fitting to that.. Your cooler can say good bye boring water, and hello delicious wort!

Was this review helpful to you?