> Hardware > Quick Disconnects >

Stainless Steel Female Quick Disconnect x 1/2" Barb
The female quick connect seals up very well without a lot of work when connecting. Will work with other SS quick connects. hese feature 1/2" Barb on the ends for easy connectivity to any 1/2" tubing you may have. Home brew supplies
 
The female quick connect seals up very well without a lot of work when connecting. Will work with other SS quick connects (although, it does not work in conjunction with plastic or brass quick disconnects). These feature 1/2" Barb on the ends for easy connectivity to any 1/2" tubing you may have. Made from 304 stainless steel. For typical brewing applications, this connection will hold pressure when moving liquids at 60 PSI or less.
Price: $8.49

Availability: Usually Ships in 24 Hours
Quantity:

Features
 

Stainless Steel Female Quick Disconnect x 1/2" Barb


Average Customer Review: 4.5 of 5 Total Reviews: 9 Write a review.

  0 of 0 people found the following review helpful:
 
A little bit expansive... October 11, 2017
Reviewer: Remi from Quebec  
...but less expansive than anywhere else!
Use it with the male disconnect to easily plug and unplug your hoses. Brewing made easy.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
No Muss No Fuss May 12, 2014
Reviewer: Sam Larkman from Bracebridge, ON Canada  
one hand operation!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
works great November 24, 2013
Reviewer: Brian R  
These work great. I switched my three tier system over to them a few months ago. When cleaning just make sure to pull the o-ring out and clean those as well or they get gummed up after a few batches and make the connects sticky to piece together. Solid build has taken a beating since I just toss my hoses on the ground when not in use.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
stainless connects November 14, 2013
Reviewer: Doug Hill  
These connects are a life saver. I use them on my brutus system to move fluids around easily. The o-rings are easily removed to be cleaned. This will avoid any sticking. Great design. Have had no issues with mine and going on a year or so.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Seem not be aging very well November 13, 2013
Reviewer: Remi Boyer from Quebec  
Own six of them on a few hoses and 2 of them are starting to stuck on a regular basis after less than 10 batches of beer and good cleaning habits. The ball lock system and/or the spring inside may not work much longer.

Was this review helpful to you?

View All Customer Reviews