> Hardware > Fittings > Nipples >

Stainless Steel Nipple - 1/2" Male NPT (2")
Stainless Nipple - 1/2" x 2" Threaded There is approximately a 1/2" of thread on both side of this fitting and a one inch section that is not threaded. Lock nuts do not work on this product. Home Brew Supplies
 
This nipple is made out of 304 stainless steel. It has approximately 1/2" of threads on both sides with a 1.5" section that is not threaded.
Price: $3.19

Availability: Usually Ships in 24 Hours
Quantity:

Features
 

Stainless Steel Nipple - 1/2" Male NPT x 1/2" Male NPT (2" Length)


Details:

  • Made from 304 stainless steel

  • Nipple measurement is 1/2" x 2"

  • Comes with a male National Pipe Thread (NPT) fitting

  • Used to connect 1/2" ball valves to other devices by creating a union

  • Can be installed on a 7/8" hole drilled on the pot


Average Customer Review: 5 of 5 Total Reviews: 2 Write a review.

  0 of 0 people found the following review helpful:
 
Did the trick for my cooler mash tun! December 2, 2013
Reviewer: Andrew Stevens from Chateauguay, QC Canada  
Did the trick for my cooler mash tun!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Fixed a mash tun problem! July 26, 2013
Reviewer: SS from Edmonton, AB Canada  
The cooler kit I bought at a LHBS came with a shorter closed nipple, which not only doesn't fit well, but also didn't seal well.  The one thing a mash tun does not need is a leak!  This nipple from OBK fixed both problems as the flat part allows an o-ring to seal properly.

Was this review helpful to you?