> Hardware > Hardware Kits >

Stainless Steel RIMS Hardware Kit - 1.5" Tri Clover (20")
Stainless Steel RIMS Hardware Kit - 1.5" Tri Clover
 
Alternative Views:


The Stainless Steel RIMS Hardware Kit is designed to maintain a constant mash temperature. It can also be used for step mashing and also mash-out. Unlike any other RIMS tube on the market, it features all Tri Clover Compatible fittings for easy disassembly and cleaning. When disassembled, you can pass a brush clean through the entire tube body. The inlet and outlet feature 1.5" Tri Clover Compatible ferrules which will accept any tri-clover hardware. The body diameter is 1 1/2" OD tubing with a 1 3/8" ID, providing for an improved flow rate across the element to reduce any possible wort scorching. It has a 20" overall length and the RIMS tube features a unique 2-piece design allowing the inlet and outlet to be rotated to any angle from each other that you want.

This kit comes with both a heating element adapter and either a 4500W Camco 2929 or a 5500W Camco 2935.

WARNING! When you add an element it must be wired by a qualified electrician, enclosed in a water-tight enclosure and protected with a GFCI circuit breaker! Improper wiring and/or control of a heater element can KILL YOU! If you have any doubt, please return it for a full refund. This device is inherently dangerous. Improperly used, dangerous pressure can quickly build in the tube resulting in an explosion of boiling liquid that is extremely harmful and will result in everything from extreme burns to death. When assembling the RIMS tube, be sure that the element is not contacting the body or thermowell of the RIMS tube. Never use an element that cannot be installed without clearing the tube body. Never rotate the inlet and outlet while the RIMS tube is in operation.If you have any doubts in your ability to install and operate this RIMS tube, please do not buy it.
Price: $194.99


Availability: Usually Ships in 24 Hours

Choose Your Heating Element

Camco 2929, 4500W 240V Foldback Heater Element (LWD)
Camco 2935, 5500W 240V Foldback Heater Element (LWD) [Add $3.00]

Quantity:  
Features
 

Stainless Steel RIMS Hardware Kit - 1.5" Tri Clover (20")

Includes:
  • 1.5" Tri Clover Compatible 2-piece RIMS Tube x 2
  • Silicone Gaskets x 5
  • Tri Clover Compatible Clamps x 5
  • Heating Element Cover Cap x 1
  • Stainless Steel Tri-Clover Heating Element Adapter - 1.5" Tri-Clover x 1" NPS x 1

Either:
  • 4500W,240VScrew In Element LWD LimeLife Camco model 2929 Foldback,SS Bush
  • 5500W,240VScrew In Element LWD LimeLife Camco model 2935 Foldback,SS Bush

A temperature controller and a pump are required but NOT included.

Share your knowledge of this product with other customers...
Click here to write a review