> Hardware >

Stainless Steel Tri-Clover RIMS Tube - 1.5" TC
RIMS Tube Tri Clover 1.5"
The OBK 1.5" Tri Clover compatible clamp-based RIMS Tube is designed to maintain a constant mash temperature. It can also be used for step mashing and also mash-out. Unlike any other RIMS tube on the market, it features all Tri Clover Compatible fittings for easy disassembly and cleaning. When disassembled, you can pass a brush clean through the entire tube body. The inlet and outlet feature 1.5" Tri Clover Compatible ferrules which will accept our barb or NPT Tri Clover Compatible fittings. The body diameter is 1.5" OD tubing with a 1.375" ID, providing for an improved flow rate across the element to reduce any possible wort scorching. A 16" overall length of the RIMS tube itself allows for almost any heater element to be installed and a unique 2-piece design allows the inlet and outlet to be rotated to any angle from each other that you want.

Either element end fitting is threaded with 1" NPS threads to match almost every water heater element available at any home improvement center. Similar products use the easier to find NPT threads which will almost always bind with the element before sealing.
Price: $117.99

Availability: Usually Ships in 24 Hours


Stainless Steel RIMS Tube - 1.5" Tri Clover Compatible

  • 1 - 1.5" Tri Clover Compatible 2-piece RIMS Tube
  • 5 - Silicone Gaskets
  • 5 - Tri Clover Compatible Clamps

A water heater element and temperature controller are required but not included. Your system will also require a pump. To easily add an element please use our 1.5" Element Adapter

When you add an element it must be wired by a qualified electrician, enclosed in a water-tight enclosure and protected with a GFCI circuit breaker! Improper wiring and/or control of a heater element can KILL YOU! If you have any doubt, please return it for a full refund. This device is inherently dangerous. Improperly used, dangerous pressure can quickly build in the tube resulting in an explosion of boiling liquid that is extremely harmful and will result in everything from extreme burns to death. When assembling the RIMS tube, be sure that the element is not contacting the body or thermowell of the RIMS tube. Never use an element that cannot be installed without clearing the tube body. Never rotate the inlet and outlet while the RIMS tube is in operation. If you have any doubts in your ability to install and operate this RIMS tube, please do not buy it.

Share your knowledge of this product with other customers...
Click here to write a review