> Brewing Equipment > Mashing >

Stainless Steel Weldless Cooler Kit (2 Piece)
Stainless Steel Weldless Cooler Kit (2 Piece Ball Valve)
 
Replace the standard plastic spigot on your cooler with this heavy duty stainless steel ball valve and bulkhead cooler kit. Simply removed old spigot and install the kit in the stock hole, tighten the coupler on the inside of the cooler. This will allow for use as a mash tun or hot water tank. Optional 1/2" or 3/8" barb for attaching tubing to perform transfers. Inside coupler allows for any 1/2" attachment. Sealing o-ring is high-temperature, food-grade.
Price: $31.99

Availability: Usually Ships in 24 Hours

Choose Barb Size

1/2" Barb
3/8" Barb

Quantity:
Features
 

Stainless Steel Weldless Cooler Kit (2 Piece)

Specifications:
  • Made of 304 Stainless Steel
  • Fully Serviceable 1/2" FPT 2-Piece Ball Valve
  • Full port
  • Minimum wall thickness of 1/4"
  • Maximum wall thickness of 5/8"

Includes:
  • Stainless Steel Weldless Cooler Bulkhead - 1/2" NPT (2 1/2") x 1
  • Stainless Steel 2-Piece Ball Valve - 1/2" Female NPT x 1

Average Customer Review: Average Customer Review: 5 of 5 5 of 5 Total Reviews: 5 Write a review.

  0 of 0 people found the following review helpful:
 
4 of 5 Kit too large for 5-gallon cooler October 11, 2017
Reviewer: Justin Murray from Ottawa, ON  
Quality hardware, however in my experience, the coupler could not be tightened far enough to form a tight seal, even when using the existing manufacturer's gasket from my 5-gallon rubbermaid cooler. I would recommend getting two extra washers in order to tighten properly.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Perfect. December 4, 2014
Reviewer: james clarke from Ontario,CANADA eh!  
Arrived fast, better than I hoped for...these guys are good! Thanks!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Easiest way to go. October 16, 2014
Reviewer: Aaron Lycett from St Thomas, ON Canada  
A while back as I was getting into brewing, i stumbled upon these guys looking for these parts. I found this all in one kit, saved me some running around!

Thanks

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Easy Peasy February 21, 2014
Reviewer: Mike Hermetz from Courtice, ON Canada  
Took the thinking out of it. I tried to source these parts individually and it was proving to be a nightmare. Found this and it was cheaper to boot.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 good deal July 30, 2013
Reviewer: Ivan Kozoletov from Red Deer, AB Canada  
zero hassle, fully assembled and ready to go.

Was this review helpful to you?