> Draft Equipment > Carbonating > Regulators > Taprite Regulators >

Taprite 1-Way Secondary Co2 Regulator (Poly Bonnet, 60 PSI) [T1661ST-10]
Taprite Single Product Secondary CO2 Regulator
Alternative Views:

Premium Taprite 1-Way Secondary CO2 Regulator. NSF Approved -- Approved for use by all major breweries. Manufactured in the USA.

Solid brass body. Regulator has "shut down" safety system (blow off at 55 to 60 PSI.) Heavy duty UL rated dual gauges. Right hand (RH) threaded ports. The Taprite regulator has a one year manufacturer's warranty. The bonnet is made from Polycorbonate. The regulator is approved for CO2.

Secondary regulators are used when you are attempting to dispense two or more kegs off of the same CO2 tank.

A secondary regulator will allow you to regulate the pressure of each keg individually.

Features 1/4" MFL valve output connection (does NOT include a Stainless Steel Barbed Swivel Nut).

OntarioBeerKegs is an official distributor of Taprite. We offer a one year in house warranty on all Taprite products.
Price: $64.99

Availability: Usually Ships in 24 Hours


Taprite 1-Way Secondary CO2 Regulator (Poly Bonnet, 60PSI) [T1661ST-10]

  • To protect dispensing systems each regulator has a built-in high volume external safety relief valve factory set to relieve at 55-60 PSIG.
  • Taprite secondary regulators are designed to further reduce pressure from a primary regulator to a proper dispensing level.
  • Internal relief valve opens if the delivery pressure exceeds set pressure by 15 PSIG. This serves as a warning that the seat or diaphragm may be worn and require replacing.
  • Forged brass body for greater durability. Body has enough mass to serve as a heat sink to help prevent freeze up. Can handle Co2
  • Polycorbonate Bonnet
  • 1/4" NPT inlet (Right hand thread)
  • Body parts are 1/4" NPT (Right hand thread)
  • 1/4" MFL valve outlet (Right hand thread)
  • Working Pressure Range 0-50 PSI
  • Front loading seat assembly is easily replaceable in the field
  • Comes with wall mounting brackets
  • 0-60 PSI low pressure gauge (Right Hand Thread)

Average Customer Review: Average Customer Review: 4 of 5 4 of 5 Total Reviews: 1 Write a review.

  3 of 3 people found the following review helpful:
4 of 5 review connections! April 2, 2015
Reviewer: Nathaniel Heppell from Hamilton, ON Canada  
Understand that taprite has left and right hand threaded regulators, and that you will need to understand how you will make these connections work with your setup.  I needed a right/left nipple and an aftermarket right hand thread gauge to connect this to the taprite dual gauge regulator.

Was this review helpful to you?