> Draft Equipment > Carbonating > Regulators > Taprite Regulators >

Taprite 4-Way Secondary Panel-Mounted Co2 Regulator With Beer Line Fittings (Poly Bonnet, 60 PSI) [T1694STWMK]
Taprite Quad Secondary CO2 Regulator Wall Mount
Alternative Views:

This 4-way CO2 regulator by Taprite will allow you to control the gas flow/pressure to each of up to 4 kegs at the same time.

Secondary regulators are used when you are attempting to dispense two or more kegs off of the same CO2 tank. A secondary regulator will allow you to regulate the pressure of each keg individually.

This particular secondary regulator comes pre-installed on a 18-gauge galvanized metal wall mount base. Attached to the wall mount are 4 integrated 1/2" Male NPT "Y" connections for attaching your beverage lines. Taking advantage of the mount helps to keep your dispensing area clear of clutter and your different beer lines organized. Doing so makes your keg and regulator setup look far more professional and cuts down on wasting time fumbling around with beer/gas lines.
Price: $384.99

Availability: Usually Ships in 24 Hours


Taprite 4-Way Secondary Panel-Mounted CO2 Regulator w/ Beer Line Fittings (Poly Bonnet, 60 PSI) [T1694STWMK]

  • To protect dispensing systems each regulator has a built-in high volume external safety relief valve factory set to relieve at 55-65 PSIG.
  • Taprite secondary regulators are designed to further reduce pressure from a primary regulator to a proper dispensing level.
  • Internal relief valve opens if the delivery pressure exceeds set pressure by 15 PSIG. This serves as a warning that the seat or diaphragm may be worn and require replacing.
  • Forged brass body for greater durability. Body has enough mass to serve as a heat sink to help prevent freeze up.
  • Body parts are 1/4" NPT (Right hand thread)
  • 5/16" barbed inlet designed for 5/16" I.D. pressure tubing.
  • Working pressure range is 0-50psi.
  • Front loading seat assembly is easily replaceable in the field
  • 60psi Gauges
  • Stainless Steel 18-gauge galvanized metal wall mount with 1/8" mounting holes.
  • Mount has four 1/2" Male NPT connections for use with beverage lines.

Wall Mount Dimensions: 21" x 8 1/2"

Share your knowledge of this product with other customers...
Click here to write a review