> Draft Equipment > Carbonating > Regulators > Taprite Regulators >

Taprite 5-Way Secondary Pass-Thru CO2 Regulator (Poly Bonnet, 60PSI) [T1695ST-2N]
Taprite 5-Way Secondary Regulator
 
Alternative Views:


Premium Taprite 5-Way Secondary Pass-Thru CO2 Regulator. NSF Approved -- Approved for use by all major breweries. Manufactured in the USA.

Solid brass body with 5/16" OD nipple. Regulator has "shut down" safety system (blow off at 55 to 60 PSI.) Heavy duty UL rated dual gauges. Right hand (RH) threaded ports. The Taprite regulator has a one year manufacturer's warranty. The bonnet is made from Polycorbonate. The regulator is approved for CO2.

Pass-Thru regulators have 5/16" OD barbs on each side allowing you to attach tubing.

Secondary regulators are used when you are attempting to dispense two or more kegs off of the same CO2 tank.

A secondary regulator will allow you to regulate the pressure of each keg individually.

Features 5/16" OD barbed shut-off valves.

OntarioBeerKegs is an official distributor of Taprite. We offer a one year in house warranty on all Taprite products.
Price:
$289.99

Availability: Usually Ships in 24 Hours
Quantity:

Features
 

Taprite 5-Way Secondary Pass-Thru CO2 Regulator (Poly Bonnet, 60PSI) [T1695ST-2N]


Features

  • To protect dispensing systems each regulator has a built-in high volume external safety relief valve factory set to relieve at 55-60 PSIG.

  • Taprite secondary regulators are designed to further reduce pressure from a primary regulator to a proper dispensing level.

  • Internal relief valve opens if the delivery pressure exceeds set pressure by 15 PSIG. This serves as a warning that the seat or diaphragm may be worn and require replacing.

  • Forged brass body for greater durability. Body has enough mass to serve as a heat sink to help prevent freeze up. Can handle Co2

  • Pass-Thru design allows full pass-thru through the body

  • Polycorbonate Bonnet

  • 5/16" OD barbed inlet (Right hand thread)

  • Body parts are 1/4" NPT (Right hand thread)

  • 5/16" OD barbed shut-off valve outlets (Right hand thread)

  • Working Pressure Range 0-50 PSI

  • Front loading seat assembly is easily replaceable in the field

  • Comes with wall mounting brackets

  • 0-60 PSI low pressure gauges (Right Hand Thread)