> Hardware >

Taprite "D" Style Sanke Coupler [CH5000]
Taprite "D" Style Coupler
American made Taprite sanke keg coupler. The "D" coupler is the standard connection type for most North American beer brands.

  • Model: CH5000
  • 55 psi pressure relief valve
  • Forged brass body
  • D System coupler
  • KAM-Lock keg lock feature
  • Removable hose barb with probe washer for effortless cleaning and series tapping
  • Warranty: 1 year parts
  • Blue lever-handle Sankey Keg Coupler
  • Can be quickly dismantled for cleaning
  • Ball check valve prevents back flow of beer and can be easily removed for cleaning
  • NSF Approved
  • Approved: UL
  • Weight: 1.85 pounds
  • Dimensions: 4"H x 6.5" W x 3" D

Please Note: A Tail Piece Assembly is recommended as these parts are needed to properly hook up a Sanke Coupler to tubing.
Price: $49.99

Availability: Usually Ships in 24 Hours

1/4" Tail Piece Assembly

Add a tail piece assembly? [Add $4.99]


Taprite "D" Style Sanke Coupler [CH5000]

Safety: A high-capacity pressure relief valve has been incorporated as an integral part of the coupler body. Serving two purposes: when functioning with other relief devices in the system, it will prevent a keg from reaching pressures in excess of recommended working pressure. Also, it allows the user to relieve pressure when needing to prevent or correct dispensing problems.

Efficiency: Designed for maximum flow. Specially designed pressure inlet nipple eliminates the need for a coupling washer when used with standard NADS check valve. Flow of gas is controlled by the lever handle; in the up position is off, when down it is on.

Simplicity: Locate the coupler onto the keg valve and rotate clockwise until secure. Pull the lever handle and push down; this opens the keg valve and pressure inlet on the coupler. You are now ready to dispense. This coupler can be quickly dismantled for cleaning and periodic service. No special tools required.

Find Your Brand:

Sanke Coupler Chart
(Always confirm with the store when purchasing the keg if it will be compatible.)

Average Customer Review: 4.5 of 5 Total Reviews: 2 Write a review.

  1 of 1 people found the following review helpful:
so far so good April 2, 2015
Reviewer: Ian MacNaughtan from Toronto, ON Canada  
no leaks, has so far performed much better than the shirron coupler.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
To buy again December 17, 2014
Reviewer: Steve Houle from Quebec, QC Canada  
I bought 2 couplers and they are great.  The first is used to dispense the beer and the second to fill/clean my kegs.  The second, I just removed the white small ball and the gas rubber inside to be able to tap an empty key to fill it by the top or empty the liquid by the gas side.

Was this review helpful to you?