> Draft Equipment > Carbonating > Regulators > Taprite Regulators >

Taprite Dual Primary 2P Co2 Regulator (Poly Bonnet, 60 PSI & 2000 PSI) [T752HP-02]
Taprite 2P2P Dual Product Regulator features a CGA320 inlet, 1/4" flare shut-off. 60lb and 2000lb gauges.
Premium Taprite Primary Dual Product CO2 Regulator. NSF Approved -- Approved for use by all major breweries. Manufactured in the USA.

Solid brass body with extra long nipple. Regulator has "shut down" safety system (blow off at 55 to 60 PSI.) Permanent Quad-Ring Seal on inlet nipple helps eliminate a source of leaks -- no need to use a new fiber washer each time a tank is changed. Heavy duty UL rated dual gauges. Left hand (LH) threaded ports with CGA 320 shank and nut.

The Taprite regulator has a one year manufacturer's warranty. The bonnet is made from Polycorbonate. The regulator is approved for CO2.

Features MFL threaded valve output connections (does NOT include a Stainless Steel Barbed Swivel Nut).

OntarioBeerKegs is an official distributor of Taprite. We offer a one year in house warranty on all Taprite products.
Price: $139.99
Sale Price: $132.49
Save $7.50!

Availability: Usually Ships in 24 Hours


Taprite Dual Primary 2P CO2 Regulator (Poly Bonnet, 60PSI & 2000PSI) [T752HP-02]

  • To protect dispensing systems each regulator has a built-in high volume external safety relief valve factory set to relieve at 55-60 PSIG.
  • Internal relief valve opens if the delivery pressure exceeds set pressure by 15 PSIG. This serves as a warning that the seat or diaphragm may be worn and require replacing.
  • Forged brass body for greater durability. Body has enough mass to serve as a heat sink to help prevent freeze up. Can handle Co2.
  • Polycorbonate Bonnet
  • CGA320 Inlet (Left hand thread)
  • Body parts are 1/4" NPT
  • 1/4" male flared valve outlets (Right hand thread)
  • Working Pressure Range 0-50 PSI
  • Front loading seat assembly is easily replaceable in the field.
  • 0-60 PSI low pressure gauges (Right Hand Thread)
  • 0-2000 PSI high pressure gauge (Left Hand Thread)
  • 10 3/4" Wide
  • 7 1/2" Tall

Average Customer Review: Average Customer Review: 5 of 5 5 of 5 Total Reviews: 3 Write a review.

  0 of 0 people found the following review helpful:
5 of 5 Quality December 6, 2019
Reviewer: Lance from North Bay  
I was using a CO2PO regulator that came with a kegging system I got from Northern Brewer.....sadly that regulator only lasted about a week then started leaking from the bleed valve so it needed to be replaced. This Taprite unit was a substantial upgrade from the CO2PO regulator I was using. My old regulator would jump around and show inconsistent pressures anytime I would shut off the CO2 then reopen it, but this Taprite unit is very consistent and doesn't jump around. It's an excellent regulator!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
5 of 5 No problems yet October 26, 2017
Reviewer: Billy from Trois-Rivières  
Have had this regulator since early 2016 and has performed very well. I crank to 40 psi for burst carbonation every time with no problem.

Was this review helpful to you?

  1 of 1 people found the following review helpful:
5 of 5 Nice Regulator December 31, 2016
Reviewer: Jarrod Connolly  
Regulator is well put together and feels solid. Attached easily to my tank and I can control two separate products with convenient shut off valves.

Was this review helpful to you?