> Draft Equipment > Carbonating > Regulators > Taprite Regulators >

Taprite Dual Primary 2P CO2 & Nitrogen Regulator (Zinc Bonnet, 60PSI & 2000PSI) [752HP-02]
Taprite Dual Product Dual Pressure Regulator
 
Premium Taprite Dual Product Dual Pressure Regulator. NSF Approved -- Approved for use by all major breweries. Manufactured in the USA.

Solid brass body with extra long nipple. Regulator has "shut down" safety system (blow off at 55 to 60 PSI.) Permanent Quad-Ring Seal on inlet nipple helps eliminate a source of leaks -- no need to use a new fiber washer each time a tank is changed. Heavy duty UL rated dual gauges. Left hand (LH) threaded ports with CGA 320 shank and nut.

The Taprite regulator has a one year manufacturer's warranty. The bonnet is made from industrial zinc which can handle higher pressures. The regulator is approved for CO2, argon, nitrogen, beer gas, and beer gas blends.

This Dual Body Regulator is the perfect choice for those who want to keep different pressures on different beer styles. Also used for serving and carbonating simultaneously off the same CO2 tank.

Features an MFL threaded output connection (includes two Stainless Steel 5/16 Barbed Swivel Nuts).

OntarioBeerKegs is an official distributor of Taprite. We offer a one year in house warranty on all Taprite products.
Price: $144.99
Sale Price: $136.49
Save $8.50!

Availability: Usually Ships in 24 Hours
Quantity:

Features
 

Taprite Dual Primary 2P CO2 & Nitrogen Regulator (Zinc Bonnet, 60PSI & 2000PSI) [752HP-02]

Features
  • To protect dispensing systems each regulator has a built-in high volume external safety relief valve factory set to relieve at 55-60 PSIG.
  • Internal relief valve opens if the delivery pressure exceeds set pressure by 15 PSIG. This serves as a warning that the seat or diaphragm may be worn and require replacing.
  • Forged brass body for greater durability. Body has enough mass to serve as a heat sink to help prevent freeze up. Can handle Co2, Nitrogen, Argon and blended Beer gas.
  • Durable Zinc Bonnet will not strip or break like polycorbonate (plastic)
  • CGA320 Inlet (Left hand thread)
  • Body parts are 1/4" NPT
  • Fits 1/4" I.D. pressure hose. Inlet designed for 1/4" I.D. pressure tubing.
  • 1/4" male flared outlet with check (Right hand thread)
  • Working Pressure Range 0-50 PSI
  • Front loading seat assembly is easily replaceable in the field
  • 0-60 PSI low pressure gauges (Right Hand Thread)
  • 0-2000 PSI high pressure gauge (Left Hand Thread)
Dimensions:
  • 10 3/4" Wide
  • 7 1/2" Tall

Average Customer Review: 4.5 of 5 Total Reviews: 3 Write a review.

  0 of 0 people found the following review helpful:
 
Good Product, Could Be Better. CHECK FOR LEAKS! July 17, 2016
Reviewer: LP from Lethbridge, AB Canada  
Overall a good product. Make sure you have all the swivel nuts/barbs you need in the correct size. Can't hurt to order a couple extra in each size just in case. Would be nice if the regulators had the option of T-handles for convenience. Also check for leaks with a spray bottle with dish soap/water. I don't know what happened but I checked every joint for leaks when I first set it up and then put it in my fridge. I think the temp drop maybe shrunk the parts causing a leak at the nipple between the regulators. Lost a full 20lbs bottle of CO2 in two weeks that should've lasted a year. Cost me $65! So check multiple times on your entire system, both warm and cold, kegs, hoses, tank valve, everything and do it every time you change anything.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Awesome February 11, 2016
Reviewer: George from Burlington On  
Placed order and one day later BAM it was at my door. Excellent product.

Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
Awesome! September 29, 2014
Reviewer: Ivan from Waterloo  
I bought this to carb different beer to different pressure. I have the previous model to this one I think and it's been great!  It's a lot more bulky than a single, so make sure it will fit in your fridge with your kegs!  I also had to add an extra tank strap to keep my gas bottle upright as the extended regulator length makes the cylinder want to tip over (5 lb tank). Really happy with the product though.

Was this review helpful to you?