> Draft Equipment >

Taprite "G" Style Coupler [CH5200G-SS]
Taprite "G" Style Coupler
Safety: A high-capacity pressure relief valve has been incorporated as an integral part of the coupler body. Serving two purposes: when functioning with other relief devices in the system, it will prevent a keg from reaching pressures in excess of recommended working pressure. Also, it allows the user to relieve pressure when needing to prevent or correct dispensing problems.

Efficiency: Designed for maximum flow. Specially designed pressure inlet nipple eliminates the need for a coupling washer when used with standard NADS check valve. Flow of gas is controlled by the lever handle; in the up position is off, when down it is on.

Simplicity: Locate the coupler onto the keg valve and rotate clockwise until secure. Squeeze the lever handle and push down; this opens the keg valve and pressure inlet on the coupler. You are now ready to dispense. This coupler can be quickly dismantled for cleaning and periodic service. No special tools required.

Please Note: A Tail Piece Assembly is recommended as these parts are needed to properly hook up a Sanke Coupler to tubing.
Price: 89.99

Availability: Usually Ships in 24 Hours


Taprite "G" Style Coupler [CH5200G-SS]

Find Your Brand:

Sanke Coupler Chart

(Always confirm with the store when purchasing the keg if it will be compatible.)

Share your knowledge of this product with other customers...
Click here to write a review