> Draft Equipment > Carbonating > Regulators > Taprite Regulators >

Taprite Primary Co2 & Nitrogen Regulator (Zinc Bonnet, 60 PSI & 2000 PSI) [742HP-02]
Premium Taprite Dual Gauge Regulator
Premium Taprite Dual Product Dual Pressure Regulator. NSF Approved -- Approved for use by all major breweries. Manufactured in the USA.

Solid brass body with extra long nipple. Regulator has "shut down" safety system (blow off at 55 to 60 PSI.) Permanent Quad-Ring Seal on inlet nipple helps eliminate a source of leaks -- no need to use a new fiber washer each time a tank is changed. Heavy duty UL rated dual gauges. Left hand (LH) threaded ports with CGA 320 shank and nut.

The Taprite regulator has a one year manufacturer's warranty. The bonnet is made from industrial zinc which can handle higher pressures. The regulator is approved for CO2, argon, nitrogen, beer gas, and beer gas blends.

Features an MFL threaded output connection (does NOT include a Stainless Steel Barbed Swivel Nut).

OntarioBeerKegs is an official distributor of Taprite. We offer a one year in house warranty on all Taprite products.

Price: $84.99

Availability: Usually Ships in 24 Hours


Taprite Primary CO2 & Nitrogen Regulator (Zinc Bonnet, 60 PSI & 2000 PSI) [742HP-02]

  • To protect dispensing systems each regulator has a built-in high volume external safety relief valve factory set to relieve at 55-60 PSIG.
  • Internal relief valve opens if the delivery pressure exceeds set pressure by 15 PSIG. This serves as a warning that the seat or diaphragm may be worn and require replacing.
  • Forged brass body for greater durability. Body has enough mass to serve as a heat sink to help prevent freeze up. Can handle Co2, Nitrogen, Argon and blended Beer gas.
  • Durable Zinc Bonnet will not strip or break like polycorbonate (plastic)
  • CGA320 Inlet (Left hand thread)
  • Body parts are 1/4" NPT
  • Fits 1/4" I.D. pressure hose. Inlet designed for 1/4" I.D. pressure tubing.
  • 1/4" male flared outlet with check (Right hand thread)
  • Working Pressure Range 0-50 PSI
  • Front loading seat assembly is easily replaceable in the field.
  • 0-60 PSI low pressure gauge (Right Hand Thread)
  • 0-2000 PSI high pressure gauge (Left Hand Thread)

  • 7 5/8" Wide
  • 7 1/2" Tall

Average Customer Review: Average Customer Review: 5 of 5 5 of 5 Total Reviews: 3 Write a review.

  0 of 0 people found the following review helpful:
5 of 5 Great Price March 20, 2015
Reviewer: chris storey from Cavan, ON Canada  
My local C02 store sells these for $140.00. I just had a look at it. Great price here.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
5 of 5 Very good quality January 11, 2015
Reviewer: Steve Houle from Quebec, QC Canada  
I can confirm this regulator is a high quality product; it is heavy duty.  I use that one to carbonate my  keg.  This is my second Taprite regulator!  Would buy again.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
5 of 5 Great Regulator January 2, 2015
Reviewer: Darcy Guderjan from Sherwood Park, AB Canada  
I have had these for years, they are the best for keggging. The stem with the CGA320 CO2 fitting on it is LEFT hand thread.  The pipe dope on mine started to leak after a few years and I needed to remove it to clean it up and use Teflon tape. I almost broke it trying to take it off before I tried it backwards to see if I could break it loose. So yeah, the high pressure ports are left hand thread...

Was this review helpful to you?