> Draft Equipment > Carbonating > Regulators > Taprite Regulators >

Taprite Primary High Pressure Soda Regulator (Poly Bonnet, Black Cap, 160 PSI & 2000 PSI) [T5741PMHPBK]
Taprite High Pressure Primary Soda Regulator (Poly Bonnet, Black Cap, 160 PSI & 2000 PSI) [T5741PMHPBK]
Premium Taprite Primary Soda Regulator. NSF Approved -- Approved for use by all major breweries. Manufactured in the USA.

Solid brass body with extra long nipple. Regulator has "shut down" safety system (blow off at 126 to 130 PSI.) Set the screw adjustment and forget it to maintain a constant pressure to your dispensing system. Permanent Quad-Ring Seal on inlet nipple helps eliminate a source of leaks -- no need to use a new fiber washer each time a tank is changed. Heavy duty UL rated dual gauges. Left hand (LH) threaded ports with CGA 320 shank and nut.

The Taprite regulator has a one year manufacturer's warranty. The bonnet is made from poycorbonate. The regulator is approved for CO2.

Features an MFL threaded output connection (does NOT include a Stainless Steel Barbed Swivel Nut).

OntarioBeerKegs is an official distributor of Taprite. We offer a one year in house warranty on all Taprite products.
Price: $94.99

Availability: Usually Ships in 24 Hours


Taprite Primary High Pressure Soda Regulator (Poly Bonnet, Black Cap, 160PSI & 2000PSI) [T5741PMHPBK]

  • To protect dispensing systems each regulator has a built-in high volume external safety relief valve factory set to relieve at 126-134 PSIG.
  • Internal relief valve opens if the delivery pressure exceeds set pressure by 15 PSIG. This serves as a warning that the seat or diaphragm may be worn and require replacing.
  • Forged brass body for greater durability. Body has enough mass to serve as a heat sink to help prevent freeze up. Can handle Co2.
  • Polycorbonate Bonnet
  • Black Cap
  • CGA320 Inlet (Left hand thread)
  • Body parts are 1/4" NPT
  • 1/4" male flared outlet (Right hand thread)
  • Working Pressure Range 0-120PSI
  • Non-removable adjusting screw limits maximum delivery pressure to 50 PSIG
  • Front loading seat assembly is easily replaceable in the field.
  • 0-160 PSI high pressure gauge (Right Hand Thread)
  • 0-2000 PSI high pressure gauge (Left Hand Thread)

  • 7 5/8" Wide
  • 7 1/2" Tall

Share your knowledge of this product with other customers...
Click here to write a review