> Draft Equipment > Carbonating > Regulators > Taprite Regulators >

Taprite Primary Nitrogen Regulator (Zinc Bonnet, 60psi & 3000psi) [742N]
Taprite Primary Nitrogen Regulator (60psi & 3000psi)
 
Premium Taprite Nitrogen Regulator. NSF Approved -- Approved for use by all major breweries. Manufactured in the USA.

Solid brass body with extra long nipple. Regulator has "shut down" safety system (blow off at 55 to 60 PSI.) Heavy duty UL rated dual gauges. Left hand (LH) threaded ports with CGA 580 shank and nut.

The Taprite regulator has a one year manufacturer's warranty. The bonnet is made from industrial zinc which can handle higher pressures. The regulator is approved for argon, nitrogen, beer gas, and beer gas blends.

Features an 5/16" Barbed valve outlet (Right hand thread).

OntarioBeerKegs is an official distributor of Taprite. We offer a one year in house warranty on all Taprite products.
Price:
$87.99

Availability: Usually Ships in 24 Hours
Quantity:

Features
 

Taprite Primary Nitrogen Regulator (Zinc Bonnet, 60psi & 3000psi) [742N]

Features
  • To protect dispensing systems each regulator has a built-in high volume external safety relief valve factory set to relieve at 55-60 PSIG.
  • Internal relief valve opens if the delivery pressure exceeds set pressure by 15 PSIG. This serves as a warning that the seat or diaphragm may be worn and require replacing.
  • Forged brass body for greater durability. Body has enough mass to serve as a heat sink to help prevent freeze up. Can handle Nitrogen, Argon and blended Beer gas.
  • Durable Zinc Bonnet will not strip or break like polycorbonate (plastic)
  • CGA580 Inlet (Left hand thread)
  • Body parts are 1/4" NPT
  • 5/16" Barbed valve outlet (Right hand thread)
  • Working Pressure Range 0-50 PSI
  • Front loading seat assembly is easily replaceable in the field.
  • 0-60 PSI low pressure gauge (Right Hand Thread)
  • 0-3000 PSI high pressure gauge (Left Hand Thread)
Dimensions:
  • 7 5/8" Wide
  • 7 1/2" Tall