> Draft Equipment > Kegging & Dispensing >

Tower Shank
Tower Shank with Elbow
This is designed for a replacement on your 3" tower. Or if you want to add another faucet to your 3" tower, Cut a hole (7/8") and insert. Chrome plated brass shank and nipple. Nipple can use 1/4" or 3/16" beverage lines (the lines may have to be heated in hot water first). Uses a tower shank nut 1 1/6".

Availability: Usually Ships in 24 Hours


Tower Shank

Recessed shank opening to accommodate most faucet designs.