> Brewing Equipment > Pots & Kettles >

Stainless Steel Tri-Clad Induction Ready Welded Brew Kettle - 10 Gallon
Tri-Clad Induction Ready 10 Gallon Stainless Steel Welded Brew Kettle
 
Alternative Views:


Tri-Clad Induction Ready 10 Gallon Stainless Steel Welded Brew Kettle -- Is made of 200 Series 19 Gauge Stainless Steel and it's total volume is 10 (US) gallons (38L, 40 Quart). It features solid easy to grasp handles on the sides that allow you to move it with ease. As well as two pre-welded 1/2" NPT Couplers, which are great for easily installing thermometers and ball valves. This brew kettle features a welded kettle kit, a OBK thermometer, a sturdy lid and a beautiful finish.

We recommend you purchase this product by itself. Shipping items inside the pot increases chances of damage during shipping. We will of course ship items inside a pot if you want. But we can not assume liability for damage if you choose to do so.

FREE Every Drop Dip Tube accessory, a $15 value added free to every welded kettle! The Every Drop Dip Tube is designed to thread onto the interior side of the ball valve coupler. When installed the angle can be easily adjusted to help pick up every last drop from your kettle. Make the most out of your kettle with this FREE accessory!


Full Kettle Comparison Chart
Price: $239.99

Price with Selected Options: $239.99

Availability: Usually Ships in 24 Hours

Thermometer Options


Ball Valve Options


Inside Port Options



Quantity:  
Features
 

Tri-Clad Induction Ready 10 Gallon Stainless Steel Welded Brew Kettle

Features:
  • 200 Series 19 Gauge stainless steel brew kettle
  • 5mm Tri-clad Bottom. Induction Ready
  • Bolted on handles
  • Strong sturdy lid
  • Brushed Stainless Steel
  • 25% thicker walls over entry level and economy pots
  • 625% thicker bottom compared to entry level and economy pots. Prevents scorching
  • 304 Stainless Steel 1/2" two piece OBK ball valve
  • OBK thermometer with 3" face dial & 2" probe
  • FREE Every Drop Dip Tube accessory, a $15 value added free to every welded kettle!

Inner Kettle Dimensions: Height 15 1/4" (47cm) x Diameter 14 1/8" (35.9cm)
Exterior Kettle Dimensions (handles included): Height 16 1/2" (41.9cm) x Diameter 18" (47cm)

May we also suggest...
Bar Keepers Friend Cleanser and Polish Powder (12 oz) Custom holes Stainless Steel 1/2" Male NPT x 1/2" Barb
Price: $5.19

Add
Price: $14.99

Add
Price: $2.89

Add
Bar Keepers Friend Cleanser and Polish Powder (12 oz) Custom Pot Holes Stainless Steel 1/2" MPT (Male Pipe Thread) x 1/2" Barb Fitting

Average Customer Review: 5 of 5 Total Reviews: 1 Write a review.

  1 of 1 people found the following review helpful:
 
Great Kettle May 18, 2017
Reviewer: Ernest from British Columbia  
Get this kettle!  Excellent heavier duty construction that has enough volume to avoid boil overs!  I still watch it but after numerous boils, it hasn't even come close (I start with 6.5 gallon of wort).  The lid sits on very securely and I'm glad of that as I had to leave early one brew session when it wasn't quite cooled down and the last thing I wanted was ingress to bacteria/air.  I have the 2" thermometer and prefer it as I do stir the pot on occasion and the longer probe would get in the way.  Also, the pick up tube is a terrific add on - helps to keep the trub in the centre of the pot and allows almost complete draining of the kettle possible.

Was this review helpful to you?