> Draft Equipment >

Water Cobra Wide Immersion Wort Chiller - 50' x 3/8" with Vinyl Tubing
Water Cobra Wide Immersion Wort Chiller | 50' x 3/8" with Vinyl Tubing
 
A premium immersion chiller made with 50 feet of 3/8" OD, Canadian made copper tubing. The main coils on this chiller have a lower and wider profile than most 3/8" chillers.

Whether you're brewing with extract or all-grain, bringing down the temperature of the wort quickly in order to pitch the yeast is an essential step in homebrewing. Lowering the temperature quickly reduces chances of contaminating your beer with wild yeasts and bacteria, and will reduce the levels of DMS (dimethyl sulfide) that can ruin a beer's aroma. A quick chilling of the wort will also improve clarity in the final product.

When using an immersion chiller there's no unnecessary transferring to different containers, and there's no need to dilute the wort with cold water. Just drop the immersion chiller in to the brew pot. The preferred method of sanitation is to make sure it is clean to the eye and submerge the coil portion of the chiller in to the wort during the last 15 minutes of the boil, this will kill any wild yeasts or unsanitary pests that might be introduced. Once the brew pot is taken off the boil, you can begin cooling immediately by hooking up the line and turning on the water.

Assembly is Required.
Price: $132.99
Sale Price: $119.99
Save $13.00!

Availability: Usually Ships in 24 Hours
Quantity:

Features
 

Water Cobra Wide Immersion Wort Chiller - 50' x 3/8" with Vinyl Tubing

Includes:
  • (1) 8' length of clear vinyl tubing (hose ships as one piece allowing you to cut to your desired length)
  • (3) strong Stainless Steel Hose Clamp (Large)
  • (1) 3/8" heavy duty female swivel garden hose fitting
  • (1) Instructions

Approximate Chiller Dimensions:
  • 8 1/2" coil outside diameter
  • 8 1/2" coil height
  • 14 1/2" inlet/outlet height

Share your knowledge of this product with other customers...
Click here to write a review