Auto-Siphon (3/8")

Fermtech Auto-Siphon - 3/8"

Your Price: $12.99

Availability: In Stock.

Wholesale Pricing: Available

Quantity

Description
Customer Reviews

The 24" Long Quick Start Auto Siphon provides single stroke action to draw a siphon without disturbing sediment and prevents introduction of air at the seal. Great for transferring from carboys and buckets, or larger vessels. The tip on the racking cane is slightly larger than normal, which filters out a lot of the sediment during transfer. Disassembles easily for cleaning and sanitizing.

Allows wort and beer to be transferred efficiently and easily after cooling and after fermentation. Simply insert the auto siphon into your fermenter or carboy, push down on the racking cane (included) and a siphon is started. No brewer should be without this device!

Managers note: The inside tube gasket on these are prone to drying up and causing air to get in. Use keg lube before use and after every cleaning to keep the gasket supple and help it seal.

Please Note: Uses 5/16" or 3/8" siphon tubing, it is NOT Included

Specifications:

Made out of High Grade Acrylic for Excellent Clarity
24" Length
3/8" Outer Diameter
1/4" Inner Diameter

Rating Snapshot

Select a row below to filter reviews.

Average Customer Ratings

3.6

Bad Seal

After using this siphon 3 times I noticed it wasn't working the way it was supposed to work. Upon closer inspection I noticed the seal at the bottom had a hole in it. When I contacted OBK they said there was nothing they could do about it because I purchased it more than 30 days ago. They also said aeration is a good thing ... well its not good when bottling. So I contacted the manufacturer fermtech. After asking to see a picture of the issue they agreed it was a manufacturing defect and sent out a replacement seal in the mail.

Did you find this helpful? 7 of 9 Found Helpful

Reviewed by:
Adam
from Burlington, ON Canada on 4/6/2016

Delicate

Like another reviewer said, this lasted me 4 batches before the end cracked, lost suction and I had to snap off the curved end and slide the hose on the straight part that only had hairline cracks in it. Will not last long.

Did you find this helpful? 1 of 1 Found Helpful

Reviewed by:
Ray Luck
from Fort Frances, ON Canada on 12/3/2019

Flimsy

nice as long as it works - in my case, I got 4 or 5 uses out of it before it stopped workingdue to the priming stroke, make sure you have an extra foot or two of tube so you don't pull the end out

Did you find this helpful? 1 of 1 Found Helpful

Reviewed by:
C
from N/A on 7/28/2017

Works Good, And It Is Big

Works good so far, no leaks. It is also huge, so if you're only working with smaller equipment, check out the mini version.

Did you find this helpful? 1 of 1 Found Helpful

Reviewed by:
Brian
from Mississauga on 5/18/2017

Don't Mess Around With Anything Else

No shaking, sucking, fussing around, starts your siphon in one pump. Just buy one. Wish I could get a stainless steel one, but they're cheap enough that I buy a new one every year.

Did you find this helpful? 1 of 1 Found Helpful

Reviewed by:
James Wallace
from Hamilton, ON Canada on 12/31/2016

Tubing Size Should Be 5/16

Works well but use 5/16 tubing recommended by the manufacturer not the 3/8 recommend by OBK. 3/8 allows small amounts of air to be sucked in.

Did you find this helpful? 0 of 1 Found Helpful

Reviewed by:
Greg
from Vancouver on 4/22/2019

A Must

Works and makes your task easy. Been using it and works as new after 30 uses.

Did you find this helpful?

Reviewed by:
Phylip
from Baie-Comeau on 9/18/2017

Fermtech Auto-Siphon - 3/8"

Rating Snapshot

Average Customer Ratings

Mailing List