Cannular Compact Semi-Auto Bench Top Can Seamer

Product Code: KL15769

The Cannular Compact Semi-Auto Bench Top Can Seamer is perfect for homebrewers looking to can their own beer, do small batches, or those wanting to keep their brew fresh and fully protected against the light.

Semi-Auto Design - This new version of the can seamer is semi-auto which is more consistent seaming experience over the manual model. Unlike the manual can seamer this one has no lever making it even easier to operate and apply a consistent pressure on your cans so you no longer have to worry about how hard the operator is pulling the lever.

Compact Design - The compact design of this unit makes it perfect for any situation as it can be set up almost anywhere. It only requires one person to operate, and each can should take approximately 3 seconds to seam.

It has been designed to work with 500ml (16.9 oz) cans out of the box. Different Chucks are available for purchase separately that fit standard 202 cans such as 330 ml (11.2 oz), 355 ml (12 oz), and 500ml (16.9 oz). The adjustable platform allows you to raise or lower the table spacer depending on what size can you're seaming. If you are having trouble with cans not sealing you may have to adjust the table height to ensure enough pressure is being applied to the cans when raised.

In can also be adapted for use with 32 oz Crowlers and well as Tin Plated Steel Cans for food packaging applications. To seal these types of cans you will require the correct size Chucks separately.

It is compact, durable, and safe to operate in a wet environment. The platform is made out of 304 stainless steel, so you don't have to worry about it rusting. The body is made from hammered sheet metal and kept together with stainless steel screws. Rubber feet at the base helps to keep it stationary so you don't have to worry about it slipping and sliding while operating, cutting down on potential hazards and accidents. Alternatively, you can secure it directly to a counter thanks to the built-in brackets near the feet.

The Cannular runs off of 24V DC power via the included cord and plug. The cord attaches to an Anderson socket located on the back of the unit. It can be powered through a standard wall socket.

For more information on the required cans for use with the Cannular please check out this document regarding can dimensions.

---

Looking to use this Cannular to seal 473ml cans? Try this user submitted trick! Simply add two washer type spacers (5/8" ID X 1 3/4" OD | 1/4" Thick) between the table spacer and turntable.

Now you need to purchase canning supplies, take a look at what BSC Canada has to offer or send an email to [email protected].

---

Specifications:

• Model: KL15769
• Voltage: 24V (12amps)
• Power: 250W
• Rated Speed: 3300 RPM
• Gearbox Ratio: 9.8 : 1
• Power Plug: Anderson Type 40A

Can Specifications:

• Can Height: 45mm - 190.5mm
• Can Diameter: 35mm - 101.6mm
• Compatible Can: 330ml, 355ml, 473ml, and 500ml
• Additional Chucks available