Cannular Compact Bench Top Can Seamer

Product Code: KL10757

The Cannular Compact Bench Top Can Seamer is perfect for breweries looking to can their own beer, or homebrewers wanting to keep their brew fresh and fully protected against the light.

The compact design of this unit makes it perfect for any situation as it can be set up almost anywhere. It only requires one person to operate, and each can should take approximately 5 seconds to seam.

It has been designed to work with 500ml (16.9 oz) cans, although other sizes are also compatible thanks to the different table spacers that are available. If you are having trouble with cans not sealing you may have to adjust the table height to ensure enough pressure is being applied to the cans when raised.

It is compact, durable, and safe to operate in a wet environment. The platform is made out of 304 stainless steel, so you don't have to worry about it rusting. The body is made from hammered sheet metal and kept together with stainless steel screws. Rubber feet at the base helps to keep it stationary so you don't have to worry about it slipping and sliding while operating, cutting down on potential hazards and accidents. Alternatively, you can secure it directly to a counter thanks to the built-in brackets near the feet.

The Cannular runs off of 24V DC power via the included cord and plug. The cord attaches to an Anderson socket located on the back of the unit. It can be powered through a standard wall socket.

For more information on the required cans for use with the Cannular please check out this document regarding can dimensions.

---

Now you need to purchase canning supplies, take a look at what BSC Canada has to offer or send an email to [email protected].

---

Specifications:

• Model: KL10757
• Voltage: 24V (12amps)
• Power: 250W
• Rated Speed: 3300 RPM
• Gearbox Ratio: 9.8 : 1
• Power Plug: Anderson Type 40A

Can Specifications:

• Can Height: 45-170mm
• Can Diameter: 35-75mm
• Compatible Can: 500ml