Chugger MAX Brew Pump - Polysulfone Head (Center Inlet) [CPPSMAX-CI-1]

The Chugger Brew Pump MAX - Center Inlet Polysulfone Head is designed with serious homebrewers in mind. This pump is targeted towards larger brewing systems (30+ gallons) and can move hot wort with ease. These pumps are designed to maximize flow rates while being relatively economical compared to standard commercial pumps. The housing can handle liquids up to 250°F and features a 1" Female NPT center inlet, and a 1/2" Male NPT output. When operating the pump, please note that the inlet should never be restricted, only the outlet.

Please Note: The pump head and lines need to be full before the pump is started.

DO NOT RUN DRY

---

Specifications:

• Max Flow: 17 GPM 64.4 LPM
• Max Head: 27 FT 8.2 M
• Power: .125 HP .093 KW
• Electrical: 115V
• Inlet: 1" Female NPT
• Outlet: 1/2" Male NPT
• Non-Submersible
• 60HZ 50HZ
• RPM: 3500
• Fan Cooled Motor
• Motor AMP Rating - Full Load Amps (FLA)
• Motor Only: 1.4 Amps
• Motor and Pump: 2.0 Amps
• Can handle liquids of 250°F
• Materials are FDA Food Compliant
• Components are UL Recognized
• DO NOT RUN DRY

Includes:

• Polysulfone (Front Housing)
• 316 Stainless Steel (Rear Housing)
• PTFE (Thrust Washer)
• CLEAR Silicone (O-Ring)
• Ryton/PTFE (Impeller)
• 55" Cord with Plug
• Chugger Max contains sealed bearings - no oil necessary