1. Home
  2. Brewing Equipment
  3. Chugger MINI MAX Brew Pump - Stainless Steel Head | 115/230 VAC (Inline Inlet) [TCPSS-IN]
Inline Stainless Steel Head 115/230VAC - Chugger Brew Pump MINI MAX
Inline Stainless Steel Head 115/230VAC - Chugger Brew Pump MINI MAX

Chugger MINI MAX Brew Pump - Stainless Steel Head | 115/230 VAC (Inline Inlet) [TCPSS-IN]

Write a Review
Your Price: $324.99
Availability: In Stock.
The Chugger Brew Pump MINI MAX - Inline Stainless Steel Head is designed to be a step up from the starter chugger pump providing many of the advantages of the MAX series chugger pump. This pump has the same flow rates as a standard chugger pump while providing 3X the HP allowing it to move hot wort far faster and easier. The housing can handle liquids up to 250°F and features a 1/2" Male NPT center inlet, and a 1/2" Male NPT output. When operating the pump, please note that the inlet should never be restricted, only the outlet.

Please Note: The pump head and lines need to be full before the pump is started. DO NOT RUN DRY


Specifications:
  • Max Flow: 7 GPM 22.7 LPM
  • Max Head: 18.6 FT 4.1 M
  • Power: .125 HP .093 KW
  • Electrical: 115V & 230V
  • Inlet: 1/2" Male NPT
  • Outlet: 1/2" Male NPT
  • Non-Submersible
  • 60HZ 50HZ
  • RPM: 3500
  • Fan Cooled Motor
  • Motor AMP Rating - Full Load Amps (FLA)
  • Motor Only: 1.4 Amps
  • Motor and Pump: 2.0 Amps
  • Can handle liquids of 250°F
  • Materials are FDA Food Compliant
  • Components are UL Recognized
  • DO NOT RUN DRY

Includes:
  • 316 Stainless Steel (Front Housing)
  • 316 Stainless Steel (Rear Housing)
  • PTFE (Thrust Washer)
  • CLEAR Silicone (O-Ring)
  • Ryton/PTFE (Impeller)
  • 55" Cord (NO PLUG, ELECTRICAL KNOWLEDGE REQUIRED TO INSTALL)
  • Chugger Max contains sealed bearings - no oil necessary
TOP
0 Items