D Coupler

Sanke "D" Style Keg Coupler - Black Handle

0 Review(s) Write a Review

Status: In Stock

Available: 479

Feature 5 30577

Quantity

Description

Chrome Plated "D" Style Sanke Coupler is made out of durable forged brass and is NSF approved. It features a high-capacity 55-PSI pressure relief valve that is build directly into the coupler body. When functioning with other relief devices in the system, it will prevent a keg from reaching pressures in excess of recommended working pressure. It also allows the user to relieve pressure when needing to prevent or correct dispensing problems. The pull lever handle is black and controls the flow of gas; up position is off, down position is on.

To install rotate clockwise on the keg valve until secure. Pull the lever handle and push down; this opens the keg valve and pressure inlet on the coupler. You are now ready to dispense. This coupler can be quickly dismantled for cleaning and periodic service. No special tools required.

The gas port is 3/8" OD in diameter and will fit hose with an ID of 3/8" or 5/16".

Sanke "S" style couplers are used by many European breweries. It has a longer probe than a "D" style coupler.

Please Note: A Tail Piece Assembly is recommended as these parts are needed to properly hook up a Sanke Coupler to tubing.

Specifications:

Material: Forged Brass
Finish: Chrome Plated
Tailpiece Material: Forged Brass
Probe Material: Forged Brass
Type: "D" Style
Handle Type: Short Handle
Handle Colour: Black
Tail Piece: 3/8" OD Barb
Beer Port Size: 7/8"-14 (5/8" BSP) (U.S. Beer Industry Standard)

Find Your Brand:
(Always confirm with the store when purchasing the keg if it will be compatible.)

Sanke Coupler Chart

Sanke "D" Style Keg Coupler - Black Handle

Mailing List