1. Home
  2. Brewing Equipment
  3. FermZilla Tri-Clover Conical Fermenter - 14.5 Gallon (55L) | Gen 3
FermZilla TC Conical Fermenter - 14.5 Gallon (55L)
FermZilla TC Conical Fermenter - 14.5 Gallon (55L)

FermZilla Tri-Clover Conical Fermenter - 14.5 Gallon (55L) | Gen 3

Write a Review
Your Price: $239.99
Status: In Stock
Product Code: KL25904

Generation 3 Model (2022)

The FermZilla is the successor to the Fermentasaurus, and this Tri-Clover version is now available for the first time in Canada.

This unique conical PET fermenter can be fully pressurizable up to 2.4 Bar working pressure. It is only possible thanks to the use of highly specialized PET grade plastic and the use of a new type of PET injection/blow molding machine.

Unique to these FermZilla Tri-Conicals are a myriad of improvements over the standard version that aim to provide all the advantages that tri-clover hardware and equipment provide. The bottom on the FermZilla is a 3" tri-clover ferrule that fits the newly redesigned tri-clover dump valve. In addition the collection container comes equipped standard with the 2" tri-clover harvest adapter.

These FermZilla fermenters come with all the improvements that were present with the Gen 2 FermZilla.

Some of these improvements are the following:
  • Larger Dump Valve - New 3" butterfly dump valve is more resistant to clogs from larger amounts of trub
  • Larger Opening - 4 3/4" Top port allows for easier cleaning and access to the interior of the vessel
  • Less Headspace - More appropriately sized for traditional 5 gallon batches. This new size makes purging the headspace of oxygen far easier and more effective.

Using crystal clear plastic allows homebrewers full view of the vessel and the ability to see the yeast in action. Easily dump yeast from the conical and clarify beer without needing to rack into another vessel.Cut down on unnecessary additional equipment and the risk of infection and oxidation by consolidating the fermenting, clarifying, and carbonation to one vessel.

One key feature of the FermZilla is that it gives homebrewers the ability to naturally carbonate their beer directly in the FermZilla allowing for direct dispensing. Thus eliminating the need for additional carbonation in a keg or in bottles.

Prior to using your FermZilla Fermenter a Hydro Test may be needed. Please refer to this Instruction Manual that contains vital information related to safely performing a Hydro Test on a FermZilla tank which is past its stamped certification date.

Please Note: Tanks may arrive with indents from shipping. These dents will push out and settle with use. Tanks may need certification before use. Prior to fermenting under pressure you will need the FermZilla Conical Fermenter Pressure Kit.

  • Body: High Molecular Length PET
  • Volume: 55L (17.5 Gallons, 58.1 Quart)
  • Frame: 304 Stainless Steel Frame
  • Pressure Rated: 2.4 Bar (34.8 PSI)
  • Temperature Rated: 50°C (122°F)
  • Lid Seal: Nitrile Butadiene Rubber (NBR)
  • Dump Valve: Glass reinforced nylon with stainless gate and stainless bolts

  • 41" Height (in Stand)
  • 43.5" Height (with Airlock)
  • 13.9" Tank Diameter
  • 15.7" Diameter (in Stand)
  • 28mm PCO 1881 Threads (Lid & Collection Container)

  • FermZilla 14.5 Gallon (55L) Conical Tank x 1
  • Tri-Clover Butterfly Dump Valve Assembly - 3" TC X 2" TC x 1
  • Reinforced Stainless Steel Stand with Handles x 1
  • Top Lid with PRV (35 PSI) [2 x Male Cap Threads] [Up to 4 drill ports] x 1
  • Top Lid Screw Cap x 1
  • 1000mL Collection Container & Lid [2 x Male Cap Threads] x 1
  • Tri-Clover Harvest Adapter - 2" TC x 1
  • Stainless Steel Tri-Clover Three Segment Clamp - 3" TC x 1
  • Stainless Steel Tri-Clover Clamp - 2" TC x 1
  • Silicone Tri-Clover Gasket - 3" TC x 1
  • Silicone Tri-Clover Gasket - 2" TC x 1
  • Plastic 3 Piece Airlock x 1
  • Graduation Sticker x 1
  • Strip Stick On Thermometer x 1
  • Black Bottle Caps (Pre-Attached) x 3
  • Grommet Bottle Cap (Airlock Port) x 1
  • Spare Seals x 1


0 Items