Micro Matic Chrome Plated Brass Air Quick Disconnect Nipple - Male QD X 1/4" OD Barb [73000]

This Micro Matic Air Quick Disconnect Nipple is made out of chrome plated brass and is meant to be used with other quick disconnect hardware (although, it does not work in conjunction with plastic or stainless steel quick disconnects). Installing these in your setup makes changing from one keg setup to another quick and easy.

These quick disconnect nipples come with an integrated bulkhead to allow for a wider range of installation options. The forward locknut is permanently welded to the assembly for a solid point to screw the bulkhead into place and to minimize leakage. The Maximum wall thickness is 1/4" and requires a 5/8" hole to install.

To install properly place a quick disconnect fitting in the gas line, this allows for no tools to be needed when disconnecting from the gas source. Simply press the spring loaded disconnect tab on the female side and the connection separates shutting off the gas.

It features a 1/4" OD barb on the end for easy connectivity to any 3/16" and 1/4" ID tubing you may have.

---

Specifications:

• Made out of Chrome Plated Brass
• Male Quick Disconnect
• Built-In Shutoff
• Integrated Bulkhead
• 1/4" OD Barb
• 2 1/8" Length
• Maximum Wall Thickness of 1/4"
• 150 PSI (10.3 BAR) Maximum Pressure
• Operation Temperature between -40°F to 180°F (-40°C to 82°C)
• Designed for use with 3/16" & 1/4" ID tubing

Compatible With:

• Micro Matic Chrome Plated Brass Air Quick Disconnect Coupler - Female QD X 1/4" OD Barb [70300]