1. Home
  2. Draft Equipment
  3. Micro Matic 1-Way Primary Low Pressure Co2 Regulator (15 PSI, 3000 PSI) [842-15-PP] - Premium Plus Series
Micro Matic 1-Way Primary Low Pressure Co2 Regulator (15 PSI, 3000 PSI) [842-15-PP] - Premium Plus Series
Micro Matic 1-Way Primary Low Pressure Co2 Regulator (15 PSI, 3000 PSI) [842-15-PP] - Premium Plus Series

Micro Matic 1-Way Primary Low Pressure Co2 Regulator (15 PSI, 3000 PSI) [842-15-PP] - Premium Plus Series

Write a Review
Your Price: $159.99
Status: In Stock
High quality Micromatic 1-Way Primary CO2 Regulator. Premium Plus Series. NSF Approved -- Approved for use by all major breweries. Manufactured in the USA.

This primary CO2 regulator has a chrome plated brass body that comes equipped with a CGA320 inlet.

The regulator has a "shut down" safety system (blow off at 55 to 65 PSI). High quality and highly accurate gauge. All right hand (RH) threaded ports.

This 'Low Pressure' regulator is equipped with a 0-15 PSI gauge opposed to the standard 0-60 PSI gauge traditionally found on a regulator.

The valve seat is made out of nickel plated brass for higher corrosion resistance. As well as a sintered bronze mesh inlet filter. It is approved for use with CO2.

Primary regulators are designed to be directly hookup up to your CO2 tank providing a way to reduce the high pressure of gas being dispensed.

The outlet is a 3/8" OD barbed gas shut-off valve (Right hand thread)


Specifications:
  • To protect dispensing systems each regulator has a built-in high volume external safety relief valve factory set to relieve at 55-65 PSIG.
  • Forged brass body for greater durability. Body has enough mass to serve as a heat sink to help prevent freeze up. Chrome Plated Finish. Can handle Co2
  • Nickel plated valve seat for higher corrosion resistance
  • Sintered bronze mesh inlet filter
  • Built in CO2 resistant solid nylon inlet seal
  • CGA320 Inlet (Left hand thread)
  • Body parts are 1/4" NPT
  • 3/8" OD barbed gas shut-off valve (Right hand thread)
  • Working Pressure Range 0 - 15 PSI
  • Front loading seat assembly is easily replaceable in the field
  • 0-15 PSI low pressure gauge (Right Hand Thread)
  • 0-3000 PSI high pressure gauge (Left Hand Thread)

Dimensions:
  • 7 1/2" Wide
  • 7 1/4" Tall
TOP
0 Items