Series X.1 Kegerator Dual Tower Complete Kit (with NEW Ball Lock Cornelius Kegs)

0 Review(s) Write a Review

Status: In Stock

Available: 91

Feature 5 60493

Quantity

Description
Instructions

NEW Series X.1 Model - More Power Efficient, Faster Cooling, and Better Insulation!

Introducing the all new Series X.1 Kegerator Dual Tower Complete Kit!

For the first time OBK is offering kegerator kits that come fully equipped with duotight connections. Using all duotight hardware allows the use of a wide range of different components and easy system upgradability. Save money and get what you want right away without having to retrofit a standard kegerator to fit your needs.

All of our Kegerators come equipped with a Multi-Gas Co2 Regulator (100 PSI, 3000 PSI) [MK4] as well as beverage and gas disconnects. It has 8mm duotight connections that easily connect to the included Polyethylene Tubing.

This complete kit comes with all required equipment and 2 brand new NSF Approved OBKeg 5 Gallon Cornelius Ball Lock Kegs that will perfectly to fit your needs.

Key Improvements (From Series X Kegerator):

10% More Energy Efficient
15% Faster Cooling and Improved Chilling in Warmer Climates
40% Thicker Walls for Improved Insulation
Interior Fridge Light for Better Visibility

Key Improvements (From Series 4 Kegerator):

30% Larger Evaporator
25% Larger Condenser

Kegerator Fridge Features:

New and improved Tower Fan (Font Fan)
New Circuit Boards with temperature control, calibration, and on-board memory functions
Sturdy guard rail system
Increased compressor power while being approximately 20% more electrically efficient
Improved drip tray & rear cylinder bracket holder
Glass holder and wire shelf

Please Note:

Due to the highly customizable nature of these Kegerators there are many ways for them to be assembled. As such the instructions are meant to be a very basic guide to assembling your Kegerator.

Includes:

Series X.1 Kegerator
Co2 Tank Holder (Maximum of 5lb Co2 Tank)
Multi-Gas Co2 Regulator (100 PSI, 3000 PSI) [MK4]
New NSF Approved 5 Gallon Cornelius Ball Lock OBKeg With Dual Handle - 304 Stainless Steel x 2
Font Fan (toggle on/off)
CO2 Cylinder Bracket Holder
Guard Rail
Drip Tray
Stainless Steel Door
Black Reinforced Plastic Top
Reinforced Four Point Anchored Castor Wheels
Brushed Stainless Steel Dual Faucet Beer Tower x 1
Stainless Steel Push-In Tower Shank Assembly - 1/4" (6.5mm) x 2
Nukatap Stainless Steel Beer Faucets x 2
Black Plastic Tap Handles x 2
Polyethylene Double Wall Tubing - 5/32" ID (4mm) X 5/16" OD (8mm) x 10'
Polyethylene Double Wall Tubing - 13/64" ID (5mm) X 5/16" OD (8mm) x 8'
Duotight (Push-In) Ball Lock Liquid Disconnect - 5/16" (8mm) x 2
Duotight (Push-In) Ball Lock Gas Disconnect - 5/16" (8mm) x 2
Duotight Food Grade Plastic (Push-In) Straight Reducer - 1/4" (6.35mm) X 5/16" (8mm) x 2
Duotight Food Grade Plastic (Push-In) Equal Tee - 5/16" (8mm) x 1
5-in-1 Tap and Cylinder Tool x 1
Mounting Hardware
110V

Exterior Dimensions:

Depth (with Co2 Holder): 31 1/4"
Depth (no Co2 Holder): 25"
Width: 23 5/8"
Height (no Wheels, Tower, or Rails): 33 1/2"
Height (with Tower): 48 3/4"

Interior Dimensions:

Height: 28 3/8"
Width: 19 3/8"
Depth: 17 1/2"

Shipping Dimensions:

Height: 36"
Width: 29"
Depth: 26"

To put together your Kegerator unit simple follow these steps:

Exterior Installation Instructions:

Remove the black cap at the top of the fridge and prepare the dual tower for installation.
With the tower attach the included hardware including the tower shanks and the duotight reducers.
The reducers are to be attached to the tower shanks and the EVABarrier tubing, with the larger of the two push in fitting ends attaching to the tubing and the smaller end to the tower shanks.
Insert the two 8mm EVABarrier tubing sections into the duotight push in fittings inside of the tower.
With the two included FFL duotight fittings attach them to the other end of the EVABarrier tubing.
Continue by securing your tower to the fridge allowing the beverage lines to go into the fridge.
Open up the fridge and remove the black cap inside and go to the rear and remove the other black cap.

Interior Installation Instructions:

With the exterior portion complete now it is time to install the interior hardware/equipment
Grab one of the other gas lines and put the included clamp on the hose and attach it to the 'inlet' barbed portion of the manifold. Tighten the clamp.
Using the same gas line put the other end through the hole in the fridge. Please Note: It is recommended that you add some form of insolation around the gas line in the hole to ensure that the cold temperatures of the fridge do not escape. Doing so will cut down on energy consumption and ensure that the internal temperatures are maintained better.
Once put through the hole take one of the remaining gas lines and put the included clamp on the hose and attach it to one of the 'outlet' barbed portions of the manifold. Tighten the clamp. Do this twice.
Find your two gas disconnects and thread them onto the gas lines (make sure to have a flared washer between the swivel nut and disconnects).
Take the two duotight fittings that are attached to the EVABarrier tubing lines and attach them to the included beverage disconnects.
Attach the beverage and gas disconnects to your ball lock kegs.

Co2 Installation Instructions:

Take the Co2 tank holder and hang it on the exterior hanging pegs at the back of the fridge and set your Co2 tank onto it. Secure in place with the included strap.
Attach your MK4 (or Taprite) regulator to the Co2 tank and attach the gas line coming out of the fridge to it using the flared washer found in the Taprite box. If using the MK4 regulator remove the duotight fitting and use one of the included flared washer.
With that last step you are done and ready to dispense!

Replacement Series 4, X & X.1 Kegerator - Temp. Control Circuit Board with Plastic Frame

Series X.1 Kegerator - Temp. Control Circuit Board with Plastic Frame

(0)

$29.49

In Stock

Add To Cart

Series X.1 Kegerator Dual Tower Complete Kit (with NEW Ball Lock Cornelius Kegs)

NEW Series X.1 Model - More Power Efficient, Faster Cooling, and Better Insulation!

Accessories

Mailing List