Kegerator - Series X Dual Tower Kit (Ball Lock Cornelius)

Series X Kegerator Dual Tower Kit (Ball Lock Cornelius)

Write a Review

Your Price: $949.99

Availability: In Stock.

CO2 Tank Options *

Regulator *

Choose Your Faucet *

Choose Your Second Faucet *

Add Additional Tap Handles (Comes with Black Tap Handles) *

Quantity

Description
Features
Instructions

Introducing the all new Series X Kegerator Dual Tower Kit!

For the first time OBK is offering kegerator kits that come fully equipped. These kegerator units use commercial quality well known dispensing equipment that other kegerators can't hope to match.

It is fully upgradable so you can choose your faucets, regulator, and co2 tank right from the start! Save money and get what you want right away without having to retrofit a standard kegerator kit to fit your needs.

All of our Kegerators come equipped with a free Multi-Gas Co2 Regulator (100 PSI, 3000 PSI) [MK4] with an option to upgrade to a high quality Taprite regulator. In addition they come with CM Becker disconnects. The Free MK4 Regulator comes equipped with a 8mm duotight connection that is to be removed in order to attach the included gas line.

This kit comes with all required equipment to attach 2 ball lock kegs. Kegs are NOT included.

Kegerator Fridge Features:

New and improved Font Fan
New Circuit Boards with temperature control, calibration, and on-board memory functions
Sturdy guard rail system
Increased compressor power while being approximately 20% more electrically efficient
Improved drip tray & rear cylinder bracket holder
Glass holder and wire shelf

*New (Empty) Luxfer Aluminum CO2 Tank is Optional

Please Note:

Due to the highly customizable nature of these Kegerators there are many ways for them to be assembled. As such the instructions are meant to be a very basic guide to assembling your Kegerator and may not match 100% based on what products are chosen for your kit.
We will contact you regarding shipping.

To put together your Kegerator unit simple follow these steps:

Exterior Installation Instructions:

Remove the black cap at the top of the fridge and prepare the dual tower for installation.
With the tower attach the included hardware including the tower shanks and the duotight reducers.
The reducers are to be attached to the tower shanks and the EVABarrier tubing, with the larger of the two push in fitting ends attaching to the tubing and the smaller end to the tower shanks.
Insert the two 8mm EVABarrier tubing sections into the duotight push in fittings inside of the tower.
With the two included FFL duotight fittings attach them to the other end of the EVABarrier tubing.
Continue by securing your tower to the fridge allowing the beverage lines to go into the fridge.
Open up the fridge and remove the black cap inside and go to the rear and remove the other black cap.

Interior Installation Instructions:

With the exterior portion complete now it is time to install the interior hardware/equipment
Grab one of the other gas lines and put the included clamp on the hose and attach it to the 'inlet' barbed portion of the manifold. Tighten the clamp.
Using the same gas line put the other end through the hole in the fridge. Please Note: It is recommended that you add some form of insolation around the gas line in the hole to ensure that the cold temperatures of the fridge do not escape. Doing so will cut down on energy consumption and ensure that the internal temperatures are maintained better.
Once put through the hole take one of the remaining gas lines and put the included clamp on the hose and attach it to one of the 'outlet' barbed portions of the manifold. Tighten the clamp. Do this twice.
Find your two gas disconnects and thread them onto the gas lines (make sure to have a flared washer between the swivel nut and disconnects).
Take the two duotight fittings that are attached to the EVABarrier tubing lines and attach them to the included beverage disconnects.
Attach the beverage and gas disconnects to your ball lock kegs.

Co2 Installation Instructions:

Take the Co2 tank holder and hang it on the exterior hanging pegs at the back of the fridge and set your Co2 tank onto it. Secure in place with the included strap.
Attach your MK4 (or Taprite) regulator to the Co2 tank and attach the gas line coming out of the fridge to it using the flared washer found in the Taprite box. If using the MK4 regulator remove the duotight fitting and use one of the included flared washer.
With that last step you are done and ready to dispense!

Series X Kegerator Dual Tower Kit (Ball Lock Cornelius)

Choose Options